[PATCH v3] Add support for Baltos systems

[Sascha Hauer]

On Thu, Oct 06, 2016 at 12:55:08PM +0200, yegorslists at googlemail.com wrote:
> From: Yegor Yefremov <yegorslists at googlemail.com>
> 
> OnRISC Baltos devices are based on a am335x SoC and can be booted
> either from MMC or NAND.
> 
> Signed-off-by: Yegor Yefremov <yegorslists at googlemail.com>
> ---
> Changes:
> 	v3: - make hw_param a local variable
> 	    - implement memory size detection
> 	    - remove baltos_mem_init initcall
>         v2: - remove typedef
>             - rework invalid EEPROM content handling
>             - add mmc0 as boot device for MMC boot source
> 
>  arch/arm/boards/Makefile                |   1 +
>  arch/arm/boards/vscom-baltos/Makefile   |   2 +
>  arch/arm/boards/vscom-baltos/board.c    | 132 ++++++++++
>  arch/arm/boards/vscom-baltos/lowlevel.c | 134 ++++++++++
>  arch/arm/dts/Makefile                   |   1 +
>  arch/arm/dts/am335x-baltos-minimal.dts  | 439 ++++++++++++++++++++++++++++++++
>  arch/arm/mach-omap/Kconfig              |   7 +
>  images/Makefile.am33xx                  |   8 +
>  8 files changed, 724 insertions(+)
>  create mode 100644 arch/arm/boards/vscom-baltos/Makefile
>  create mode 100644 arch/arm/boards/vscom-baltos/board.c
>  create mode 100644 arch/arm/boards/vscom-baltos/lowlevel.c
>  create mode 100644 arch/arm/dts/am335x-baltos-minimal.dts

Applied, thanks

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |