[PATCH 06/21] e1000: Do not read same register twice

[Andrey Smirnov]

EEPROM_INIT_CONTROL2_REG is already read once before entering this
switch statement, so there's not much use in reading its value for the
second time.

Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
---
 drivers/net/e1000/main.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/net/e1000/main.c b/drivers/net/e1000/main.c
index 6d92cde..11a0a2f 100644
--- a/drivers/net/e1000/main.c
+++ b/drivers/net/e1000/main.c
@@ -839,12 +839,6 @@ static int e1000_setup_link(struct e1000_hw *hw)
 		hw->fc = e1000_fc_full;
 		break;
 	default:
-		ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
-		if (ret_val) {
-			dev_dbg(hw->dev, "EEPROM Read Error\n");
-			return -E1000_ERR_EEPROM;
-		}
-
 		if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
 			hw->fc = e1000_fc_none;
 		else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == EEPROM_WORD0F_ASM_DIR)
-- 
2.5.5