[PATCH v2 5/6] aiodev: Add TEMPMON driver

Sascha Hauer s.hauer at pengutronix.de
Mon May 9 23:02:55 PDT 2016


On Fri, May 06, 2016 at 07:09:29AM -0700, Andrey Smirnov wrote:
> Port TEMPMON driver from U-Boot
> 
> Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
> ---
>  arch/arm/dts/imx6qdl.dtsi    |  14 +++
>  arch/arm/dts/imx6sx.dtsi     |  14 +++
>  drivers/aiodev/Kconfig       |   8 ++
>  drivers/aiodev/Makefile      |   1 +
>  drivers/aiodev/imx_thermal.c | 239 +++++++++++++++++++++++++++++++++++++++++++
>  5 files changed, 276 insertions(+)
>  create mode 100644 drivers/aiodev/imx_thermal.c
> 
> diff --git a/arch/arm/dts/imx6qdl.dtsi b/arch/arm/dts/imx6qdl.dtsi
> index 828be9c..0deafbc 100644
> --- a/arch/arm/dts/imx6qdl.dtsi
> +++ b/arch/arm/dts/imx6qdl.dtsi
> @@ -8,3 +8,17 @@
>  		ipu0 = &ipu1;
>  	};
>  };
> +
> +&ocotp {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	analog1: ocotp_ana1 at 34 {

@38?

> +		reg = <0x38 0x4>;
> +	};
> +};
> +
> +&tempmon {
> +	nvmem-cells = <&analog1>;
> +	nvmem-cell-names = "ocotp-ana1";
> +};

Why not use the existing binding? The nvmem binding may be better, but I
think we should not introduce new bindings without need.

> +	node = of_parse_phandle(dev->device_node, "fsl,tempmon", 0);
> +	if (!node) {
> +		ret = -EINVAL;
> +		dev_err(dev, "Failed to parse fsl,tempmon\n");
> +		goto free_calibration_data;
> +	}
> +
> +	anatop = of_find_device_by_node(node);
> +	if (!anatop) {
> +		ret = -EINVAL;
> +		dev_err(dev, "No device corresponds to fsl,tempmon\n");
> +		goto free_calibration_data;
> +	}

syscon_base_lookup_by_phandle() instead of
of_parse_phandle()/of_find_device_by_node()?

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the barebox mailing list