[PATCH] Add initial support for Netgear ReadyNAS 104

[Sascha Hauer]

On Wed, Jan 20, 2016 at 08:47:22AM +0100, Uwe Kleine-König wrote:
> Currently only second stage booting from the vendor U-Boot is tested. I
> don't want to flash barebox into NAND yet because UART-booting for
> recovery doesn't work for me.
> 
> Working so far are:
> 
>  - UART
>  - networking
>  - nand flash
> 
> Signed-off-by: Uwe Kleine-König <uwe at kleine-koenig.org>
> ---
>  arch/arm/boards/Makefile                   |  1 +
>  arch/arm/boards/netgear-rn104/Makefile     |  2 ++
>  arch/arm/boards/netgear-rn104/board.c      |  1 +
>  arch/arm/boards/netgear-rn104/kwbimage.cfg |  7 +++++++
>  arch/arm/boards/netgear-rn104/lowlevel.c   | 22 ++++++++++++++++++++++
>  arch/arm/configs/mvebu_defconfig           |  1 +
>  arch/arm/dts/Makefile                      |  1 +
>  arch/arm/dts/armada-370-rn104-bb.dts       | 11 +++++++++++
>  arch/arm/mach-mvebu/Kconfig                |  4 ++++
>  images/Makefile.mvebu                      | 11 +++++++++++
>  10 files changed, 61 insertions(+)
>  create mode 100644 arch/arm/boards/netgear-rn104/Makefile
>  create mode 100644 arch/arm/boards/netgear-rn104/board.c
>  create mode 100644 arch/arm/boards/netgear-rn104/kwbimage.cfg
>  create mode 100644 arch/arm/boards/netgear-rn104/lowlevel.c
>  create mode 100644 arch/arm/dts/armada-370-rn104-bb.dts

Applied, thanks

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |