Help configuring i.MX6 IPUv3 with a parrallel display

[Philippe Leduc]

There is no backtrace (but I do not try to increase the log level). I
re-test the behavior and splash crash only on PNG image (I enabled
picoPNG).


Philippe LEDUC
ledphilippe at gmail.com


2016-02-24 19:15 GMT+01:00 Sascha Hauer <s.hauer at pengutronix.de>:
> On Wed, Feb 24, 2016 at 02:46:08PM +0100, Philippe Leduc wrote:
>> Victory!
>>
>> I checked the timings with an oscilloscope by using Linux and
>> everything except one pin is identical: LCD_ENABLE ^^ ' . It is a GPIO
>> that let the display in sleep mode to limit consumption.
>>
>> Note that splash utility continue to freeze the board.
>
> No backtrace? Is it a BMP or a PNG that you are trying to show?
>
>>
>> About the 'driver' that parse the dt to expose the timings, I'll clean
>> up and let you review it (this time I'll use git to send you the patch
>> :) )
>
> Looking forward to it. I think it we had the issue with the missing
> parallel display support before.
>
> Sascha
>
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |