[PATCH 3/6] net: phy: micrel: Be more const correct

Philipp Zabel p.zabel at pengutronix.de
Tue Feb 2 03:17:32 PST 2016


Based on kernel commit 3c9a9f7fb0ee ("net/phy: micrel: Be more const
correct") by Jaeden Amero <jaeden.amero at ni.com>:

    In a few places in this driver, we weren't using const where we could
    have. Use const more.

    In addition, change the arrays of strings in ksz9031_config_init() to be
    not only const, but also static.

Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
---
 drivers/net/phy/micrel.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 0c97e25..6f49e73 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -91,8 +91,8 @@ static int ks8051_config_init(struct phy_device *phydev)
 }
 
 static int ksz9021_load_values_from_of(struct phy_device *phydev,
-				       struct device_node *of_node, u16 reg,
-				       const char *field[])
+				       const struct device_node *of_node,
+				       u16 reg, const char *field[])
 {
 	int val, regval, i;
 
@@ -113,8 +113,8 @@ static int ksz9021_load_values_from_of(struct phy_device *phydev,
 
 static int ksz9021_config_init(struct phy_device *phydev)
 {
-	struct device_d *dev = &phydev->dev;
-	struct device_node *of_node = dev->device_node;
+	const struct device_d *dev = &phydev->dev;
+	const struct device_node *of_node = dev->device_node;
 	const char *clk_pad_skew_names[] = {
 		"txen-skew-ps", "txc-skew-ps",
 		"rxdv-skew-ps", "rxc-skew-ps"
@@ -155,9 +155,9 @@ static int ksz9021_config_init(struct phy_device *phydev)
 #define MII_KSZ9031RN_CLK_PAD_SKEW	8
 
 static int ksz9031_of_load_skew_values(struct phy_device *phydev,
-					struct device_node *of_node,
+					const struct device_node *of_node,
 					u16 reg, size_t field_sz,
-					char *field[], u8 numfields)
+					const char *field[], u8 numfields)
 {
 	int val[4] = {-1, -2, -3, -4};
 	int matches = 0;
@@ -194,18 +194,18 @@ static int ksz9031_of_load_skew_values(struct phy_device *phydev,
 
 static int ksz9031_config_init(struct phy_device *phydev)
 {
-	struct device_d *dev = &phydev->dev;
-	struct device_node *of_node = dev->device_node;
-	char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"};
-	char *rx_data_skews[4] = {
+	const struct device_d *dev = &phydev->dev;
+	const struct device_node *of_node = dev->device_node;
+	static const char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"};
+	static const char *rx_data_skews[4] = {
 		"rxd0-skew-ps", "rxd1-skew-ps",
 		"rxd2-skew-ps", "rxd3-skew-ps"
 	};
-	char *tx_data_skews[4] = {
+	static const char *tx_data_skews[4] = {
 		"txd0-skew-ps", "txd1-skew-ps",
 		"txd2-skew-ps", "txd3-skew-ps"
 	};
-	char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"};
+	static const char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"};
 
 	if (!of_node && dev->parent->device_node)
 		of_node = dev->parent->device_node;
-- 
2.7.0.rc3




More information about the barebox mailing list