[PATCH 2/8] ARM: rockchip: Add timer driver
w.egorov at phytec.de
Tue Aug 2 23:59:59 PDT 2016
On 03.08.2016 07:47, Sascha Hauer wrote:
> On Thu, Jul 28, 2016 at 01:55:39PM +0200, Wadim Egorov wrote:
>> On 20.07.2016 19:35, Andrey Smirnov wrote:
>>> On Wed, Jul 20, 2016 at 7:17 AM, Wadim Egorov <w.egorov at phytec.de> wrote:
>>>> This driver comes from the u-boot (v2016.01).
>>> I'd suggest this to be moved to "drivers/clocksource" and converted to
>>> a proper driver that binds against DT node and doesn't use a CONFIG_*
>>> symbol to determine its base address.
>> I want to use this driver in the SPL part later. The SRAM we can use is
>> very limited on the RK3288. So I don't want to add more DT code here.
> Do we need a full barebox as SPL? This usually means we have to build
> barebox twice which is not very convenient. Can we instead build the SPL
> code into the barebox PBL? This is what I have done for i.MX.
No, we don't need a full barebox as SPL. It should be possible to build
barebox and the SPL part with one build.
More information about the barebox