[PATCH 4/6] crypto: add i.MX6 CAAM support

Lucas Stach l.stach at pengutronix.de
Wed Oct 14 07:16:30 PDT 2015


Am Mittwoch, den 14.10.2015, 15:39 +0200 schrieb Steffen Trumtrar:
> Add the i.MX6 crypto core CAAM.
> 
> The core itself works with jobrings in which descriptors can be
> queued/dequeued for processing.
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> ---
>  
[...]

> +/*
> + * Init JobR independent of platform property detection
> + */
> +static int caam_jr_init(struct device_d *dev)
> +{
> +	struct caam_drv_private_jr *jrp;
> +	int i, error;
> +
> +	jrp = dev->priv;
> +
> +	error = caam_reset_hw_jr(dev);
> +	if (error)
> +		return -EINVAL;
> +
> +	error = -ENOMEM;
> +	jrp->inpring = dma_alloc_coherent(sizeof(*jrp->inpring) * JOBR_DEPTH,
> +					  DMA_ADDRESS_BROKEN);
> +	if (!jrp->inpring)
> +		return error;
> +
> +	jrp->outring = dma_alloc_coherent(sizeof(*jrp->outring) *
> +					  JOBR_DEPTH, DMA_ADDRESS_BROKEN);
> +	if (!jrp->outring)
> +		goto out_free_inpring;

No new code with DMA_ADDRESS_BROKEN please.

> +
> +	jrp->entinfo = xzalloc(sizeof(*jrp->entinfo) * JOBR_DEPTH);
> +	if (!jrp->entinfo)
> +		goto out_free_outring;
> +
> +	for (i = 0; i < JOBR_DEPTH; i++)
> +		jrp->entinfo[i].desc_addr_dma = !0;
> +
> +	/* Setup rings */
> +	jrp->inp_ring_write_index = 0;
> +	jrp->out_ring_read_index = 0;
> +	jrp->head = 0;
> +	jrp->tail = 0;
> +
> +	wr_reg64(&jrp->rregs->inpring_base, (dma_addr_t) jrp->inpring);
> +	wr_reg64(&jrp->rregs->outring_base, (dma_addr_t) jrp->outring);

This should use the real DMA address, provided by dma_alloc_coherent
above. Hint: it also gets rid of the cast. ;)

> +	wr_reg32(&jrp->rregs->inpring_size, JOBR_DEPTH);
> +	wr_reg32(&jrp->rregs->outring_size, JOBR_DEPTH);
> +
> +	jrp->ringsize = JOBR_DEPTH;
> +
> +	return 0;
> +
> +out_free_outring:
> +	dma_free_coherent(jrp->outring, 0, sizeof(struct jr_outentry) * JOBR_DEPTH);
> +out_free_inpring:
> +	dma_free_coherent(jrp->inpring, 0, sizeof(dma_addr_t) * JOBR_DEPTH);
> +	dev_err(dev, "can't allocate job rings for %d\n", jrp->ridx);
> +	return error;
> +}
> +
[...]

Regards,
Lucas

-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |




More information about the barebox mailing list