[PATCH v2 11/19] mtd: nand_mrvl_nfc: Get ecc parameters from DT

[Sebastian Hesselbarth]

With DT helpers for ECC step size and strength, now use them on
Marvell NAND driver.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
Tested-by: Robert Jarzmik <robert.jarzmik at free.fr>
---
 drivers/mtd/nand/nand_mrvl_nfc.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/mtd/nand/nand_mrvl_nfc.c b/drivers/mtd/nand/nand_mrvl_nfc.c
index 5374e64965a2..8dcbc3dc045e 100644
--- a/drivers/mtd/nand/nand_mrvl_nfc.c
+++ b/drivers/mtd/nand/nand_mrvl_nfc.c
@@ -994,6 +994,14 @@ static int mrvl_nand_probe_dt(struct mrvl_nand_host *host)
 	if (of_get_nand_on_flash_bbt(np))
 		host->flash_bbt = 1;
 
+	host->ecc_strength = of_get_nand_ecc_strength(np);
+	if (host->ecc_strength < 0)
+		host->ecc_strength = 0;
+
+	host->ecc_step = of_get_nand_ecc_step_size(np);
+	if (host->ecc_step < 0)
+		host->ecc_step = 0;
+
 	return 0;
 }
 
-- 
2.1.4