[PATCH] net: rtl8169: get rid of DMA_ADDRESS_BROKEN

[Lucas Stach]

Don't assume a 1:1 virt to phys mapping, but use the real physical
address returned by the dma alloc function.

Signed-off-by: Lucas Stach <dev at lynxeye.de>
---
 drivers/net/rtl8169.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index 47d5e4a8..9ec0178 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -51,10 +51,12 @@ struct rtl8169_priv {
 	int			chipset;
 
 	volatile struct bufdesc	*tx_desc;
+	dma_addr_t		tx_desc_phys;
 	void			*tx_buf;
 	unsigned int		cur_tx;
 
 	volatile struct bufdesc	*rx_desc;
+	dma_addr_t		rx_desc_phys;
 	void			*rx_buf;
 	unsigned int		cur_rx;
 
@@ -228,10 +230,10 @@ static void rtl8169_init_ring(struct rtl8169_priv *priv)
 	priv->cur_rx = priv->cur_tx = 0;
 
 	priv->tx_desc = dma_alloc_coherent(NUM_TX_DESC *
-				sizeof(struct bufdesc), DMA_ADDRESS_BROKEN);
+				sizeof(struct bufdesc), &priv->tx_desc_phys);
 	priv->tx_buf = malloc(NUM_TX_DESC * PKT_BUF_SIZE);
 	priv->rx_desc = dma_alloc_coherent(NUM_RX_DESC *
-				sizeof(struct bufdesc), DMA_ADDRESS_BROKEN);
+				sizeof(struct bufdesc), &priv->rx_desc_phys);
 	priv->rx_buf = malloc(NUM_RX_DESC * PKT_BUF_SIZE);
 	dma_sync_single_for_device((unsigned long)priv->rx_buf,
 				   NUM_RX_DESC * PKT_BUF_SIZE, DMA_FROM_DEVICE);
@@ -275,9 +277,9 @@ static void rtl8169_hw_start(struct rtl8169_priv *priv)
 	/* Set DMA burst size and Interframe Gap Time */
 	RTL_W32(priv, TxConfig, (6 << TxDMAShift) | (3 << TxInterFrameGapShift));
 
-	RTL_W32(priv, TxDescStartAddrLow, virt_to_phys(priv->tx_desc));
+	RTL_W32(priv, TxDescStartAddrLow, priv->tx_desc_phys);
 	RTL_W32(priv, TxDescStartAddrHigh, 0);
-	RTL_W32(priv, RxDescStartAddrLow, virt_to_phys(priv->rx_desc));
+	RTL_W32(priv, RxDescStartAddrLow, priv->rx_desc_phys);
 	RTL_W32(priv, RxDescStartAddrHigh, 0);
 
 	/* RTL-8169sc/8110sc or later version */
-- 
2.5.0