[PATCH] video: imx: quieten down VPL output

[Lucas Stach]

Printing 3 lines of output per CRTC if no modes are found (which
may be just fine if no display is attached) is just a bit too much,
especially on SoCs like i.MX6Q that carry 4 CRTCs.
Failing to find modes is not a fatal error, so the error does not
need to be propagated into a probe failure.

Signed-off-by: Lucas Stach <dev at lynxeye.de>
---
 drivers/video/imx-ipu-v3/ipufb.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/video/imx-ipu-v3/ipufb.c b/drivers/video/imx-ipu-v3/ipufb.c
index a96883c..ea81270 100644
--- a/drivers/video/imx-ipu-v3/ipufb.c
+++ b/drivers/video/imx-ipu-v3/ipufb.c
@@ -308,7 +308,7 @@ static int ipufb_probe(struct device_d *dev)
 
 	node = of_graph_get_port_by_id(dev->parent->device_node, 2 + pdata->di);
 	if (node && of_graph_port_is_available(node)) {
-		dev_info(fbi->dev, "register vpl for %s\n", dev->parent->device_node->full_name);
+		dev_dbg(fbi->dev, "register vpl for %s\n", dev->parent->device_node->full_name);
 
 		fbi->vpl.node = dev->parent->device_node;
 		ret = vpl_register(&fbi->vpl);
@@ -330,8 +330,8 @@ static int ipufb_probe(struct device_d *dev)
 
 		ret = vpl_ioctl(&fbi->vpl, 2 + fbi->dino, VPL_GET_VIDEOMODES, &info->modes);
 		if (ret) {
-			dev_err(fbi->dev, "failed to get modes: %s\n", strerror(-ret));
-			return ret;
+			dev_dbg(fbi->dev, "failed to get modes: %s\n", strerror(-ret));
+			return 0;
 		}
 
 		ret = register_framebuffer(info);
-- 
2.5.0