[PATCH 10/10] ARM: imx6dl: Add support for Phytec phyCORE-i.MX6 SOM

[Sascha Hauer]

On Fri, Nov 06, 2015 at 11:21:58AM +0100, Stefan Christ wrote:
> From: Christian Hemp <c.hemp at phytec.de>
> 
> Add Phytec phyCORE-i.MX6 SOM.
>      - imx6dl-phytec-phycore-som-nand
>         - 256GB RAM on 1 Bank with 32Bit
>         - 10/100MBit Ethernet
>         - NAND
>         - SD
>         - UART
> 
> Signed-off-by: Stefan Christ <s.christ at phytec.de>
> Signed-off-by: Christian Hemp <c.hemp at phytec.de>
> ---

Applied all except this one.

This patch misses something. Compilation fails with:

Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:38.1-8 Label or path ecspi1 not found
Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:75.1-5 Label or path fec not found
Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:81.1-6 Label or path gpmi not found
Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:115.1-6 Label or path i2c3 not found
Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:134.5-6 syntax error

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |