[PATCH] ARM: imx6: correct Hipercam ECSPI1 pinmux

[Lucas Stach]

From: Lucas Stach <l.stach at pengutronix.de>

Correct the pinmux configuration for the chip-select GPIOs. This fixes
detection of the first SPI NOR-flash after barebox itself got loaded from
there.

Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
 arch/arm/dts/imx6dl-eltec-hipercam.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/imx6dl-eltec-hipercam.dts b/arch/arm/dts/imx6dl-eltec-hipercam.dts
index 8140c4b..737752f 100644
--- a/arch/arm/dts/imx6dl-eltec-hipercam.dts
+++ b/arch/arm/dts/imx6dl-eltec-hipercam.dts
@@ -226,8 +226,8 @@
 			fsl,pins = <MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
 				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
 				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
-				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1
-				MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x100b1
 			>;
 		};
 
-- 
2.1.0