[PATCH] ARM: atmel: sama5d3xek: let emac auto detect phy addr

[Jean-Christophe PLAGNIOL-VILLARD]

> On Jan 23, 2015, at 3:51 PM, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> 
> On Thu, Jan 22, 2015 at 03:26:53PM +0800, Bo Shen wrote:
>> On the SAMA5D35 the EMAC phy addr is 1 while not 0. So, let
>> the EMAC auto detect phy addr, or else hard code to 0, the
>> ethernet can not work on SAMA5D35 board.
>> 
>> Signed-off-by: Bo Shen <voice.shen at atmel.com>
> 
> There ere boards with different phy addresses around, so
> the current state does not work on all boards anyway. So the worst
> thing that can happen with this and the other patch for the gmac is
> that now another set of boards does not work. Let's give it a try.
> I'm open to reports when now some board stops working.
> 
> Applied this and the gmac patch.

except we can auto detect the board we are running from
so it will be better to specify it at Run time

as we have issue on auto detect on some of them

Best Regards,
J.
> 
> Sascha
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |