[PATCH v2 3/3] ARM: socfpga: add Altera SoCFPGA Development Kit support

[Steffen Trumtrar]

On Mon, Feb 23, 2015 at 10:28:09AM +0100, Jan Lübbe wrote:
> On Mo, 2015-02-23 at 10:15 +0100, Steffen Trumtrar wrote:
> > --- /dev/null
> > +++ b/arch/arm/boards/altera-socdk/board.c
> > @@ -0,0 +1,38 @@
> 
> > +static int ksz9021rn_phy_fixup(struct phy_device *dev)
> > +{
> > +	phy_write(dev, 0x09, 0x0f00);
> > +
> > +	/* rx skew */
> > +	phy_write(dev, 0x0b, 0x8105);
> > +	phy_write(dev, 0x0c, 0x0000);
> > +
> > +	/* clk/ctrl skew */
> > +	phy_write(dev, 0x0b, 0x8104);
> > +	phy_write(dev, 0x0c, 0xa0d0);
> > +
> > +	return 0;
> > +}
> > +
> > +static int socfpga_console_init(void)
> > +{
> > +	if (!of_machine_is_compatible("altr,socdk"))
> > +		return 0;
> > +
> > +	phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
> > +					   ksz9021rn_phy_fixup);
> > +
> > +	return 0;
> > +}
> > +console_initcall(socfpga_console_init);
> 
> > --- /dev/null
> > +++ b/arch/arm/dts/socfpga_cyclone5_socdk.dts
> 
> > +&gmac1 {
> > +	status = "okay";
> > +	phy-mode = "rgmii";
> > +
> > +	rxd0-skew-ps = <0>;
> > +	rxd1-skew-ps = <0>;
> > +	rxd2-skew-ps = <0>;
> > +	rxd3-skew-ps = <0>;
> > +	txen-skew-ps = <0>;
> > +	txc-skew-ps = <2600>;
> > +	rxdv-skew-ps = <0>;
> > +	rxc-skew-ps = <2000>;
> > +};
> 
> It seems that with the DT-based configuration of the skew values, the
> phy_fixup in board.c is not necessary.

Yes, one would expect that. But it didn't work, so I decided to not
debug this right now.
The socfpga-DT section needs an overhaul anyway; gpio and clkmgr bindings
are not correct anymore.

Regards,
Steffen

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |