[PATCH 2/2] Switched SAMA5D4EK development board to the newer environment method.

[Doug Brainard]

Sascha,

I got the patching thing figured out and they seem to be working well
for me.  I sent out a patch for the SAMA5D4EK new environment
requiring the patches you sent (fixing the naming issue).

Thanks,

Doug


On Thu, Feb 12, 2015 at 2:13 AM, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> On Wed, Feb 11, 2015 at 10:39:52AM -0700, Doug Brainard wrote:
>> So it looks like the following line in mtdparts-add is causing the
>> "nand0." issue:
>>
>> addpart -n /dev/${device} "$parts" || exit
>>
>> The old environment didn't use the "-n".  Removing the "-n" fixes the
>> issue and gives it the same functionality as the old environment did.
>>
>> So the question is how should I fix this?  I could remove it in the
>> default environment, but that would require all other boards using the
>> new environment to update.
>>
>> Or, I can add my own env/bin/mtdparts-add script for the board and
>> remove the "-n" from there instead which would leave the other
>> projects alone.  I'm assuming I should use this option as the fix, but
>> I wanted to confirm that with you.
>
> I would rather add a '-n' option to the mtdparts-add script. Anyway, I
> just sent a series updating the partition handling. Among other things
> I hope that this fixes the naming issue.
>
> Sascha
>
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |