[PATCH 7/7] arm: bcm283x: add rpi2 support
Alexander Aring
alex.aring at gmail.com
Sat Dec 19 10:34:04 PST 2015
This patch adds Raspberry Pi 2 support in barebox. The features should
be the same like the current RPi status in barebox.
Signed-off-by: Alexander Aring <alex.aring at gmail.com>
---
arch/arm/Kconfig | 5 +
arch/arm/boards/Makefile | 2 +-
arch/arm/boards/raspberry-pi/Makefile | 2 +
arch/arm/boards/raspberry-pi/rpi-common.c | 294 ++++++++++++++++++++++++++
arch/arm/boards/raspberry-pi/rpi.c | 292 +------------------------
arch/arm/boards/raspberry-pi/rpi.h | 28 +++
arch/arm/boards/raspberry-pi/rpi2.c | 21 ++
arch/arm/configs/rpi2_defconfig | 72 +++++++
arch/arm/mach-bcm283x/Kconfig | 9 +
arch/arm/mach-bcm283x/include/mach/mbox.h | 9 +-
arch/arm/mach-bcm283x/include/mach/platform.h | 9 +
11 files changed, 453 insertions(+), 290 deletions(-)
create mode 100644 arch/arm/boards/raspberry-pi/rpi-common.c
create mode 100644 arch/arm/boards/raspberry-pi/rpi.h
create mode 100644 arch/arm/boards/raspberry-pi/rpi2.c
create mode 100644 arch/arm/configs/rpi2_defconfig
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4e7c1fd..71d4336 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -64,6 +64,11 @@ config ARCH_BCM2835
select ARCH_BCM283X
select CPU_ARM1176
+config ARCH_BCM2836
+ bool "Broadcom BCM2836 boards"
+ select ARCH_BCM283X
+ select CPU_V7
+
config ARCH_CLPS711X
bool "Cirrus Logic EP711x/EP721x/EP731x"
select CLKDEV_LOOKUP
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 2e58f15..1029e8f 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -95,7 +95,7 @@ obj-$(CONFIG_MACH_QIL_A9260) += qil-a926x/
obj-$(CONFIG_MACH_QIL_A9G20) += qil-a926x/
obj-$(CONFIG_MACH_RADXA_ROCK) += radxa-rock/
obj-$(CONFIG_MACH_REALQ7) += datamodul-edm-qmx6/
-obj-$(CONFIG_MACH_RPI) += raspberry-pi/
+obj-$(CONFIG_MACH_RPI_COMMON) += raspberry-pi/
obj-$(CONFIG_MACH_SABRELITE) += freescale-mx6-sabrelite/
obj-$(CONFIG_MACH_SABRESD) += freescale-mx6-sabresd/
obj-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB) += freescale-mx6sx-sabresdb/
diff --git a/arch/arm/boards/raspberry-pi/Makefile b/arch/arm/boards/raspberry-pi/Makefile
index 978383a..7a3d7de 100644
--- a/arch/arm/boards/raspberry-pi/Makefile
+++ b/arch/arm/boards/raspberry-pi/Makefile
@@ -1,2 +1,4 @@
+obj-$(CONFIG_MACH_RPI_COMMON) += rpi-common.o
obj-$(CONFIG_MACH_RPI) += rpi.o
+obj-$(CONFIG_MACH_RPI2) += rpi2.o
lwl-y += lowlevel.o
diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
new file mode 100644
index 0000000..0e17587
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/rpi-common.c
@@ -0,0 +1,294 @@
+/*
+ * Copyright (C) 2009 Carlo Caione <carlo at carlocaione.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <fs.h>
+#include <linux/stat.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <envfs.h>
+#include <malloc.h>
+#include <gpio.h>
+#include <net.h>
+#include <led.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+
+#include <mach/core.h>
+#include <mach/mbox.h>
+
+#include "rpi.h"
+
+struct msg_get_arm_mem {
+ struct bcm2835_mbox_hdr hdr;
+ struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
+ u32 end_tag;
+};
+
+struct msg_get_clock_rate {
+ struct bcm2835_mbox_hdr hdr;
+ struct bcm2835_mbox_tag_get_clock_rate get_clock_rate;
+ u32 end_tag;
+};
+
+struct msg_get_board_rev {
+ struct bcm2835_mbox_hdr hdr;
+ struct bcm2835_mbox_tag_get_board_rev get_board_rev;
+ u32 end_tag;
+};
+
+struct msg_get_mac_address {
+ struct bcm2835_mbox_hdr hdr;
+ struct bcm2835_mbox_tag_get_mac_address get_mac_address;
+ u32 end_tag;
+};
+
+static int rpi_get_arm_mem(u32 *size)
+{
+ BCM2835_MBOX_STACK_ALIGN(struct msg_get_arm_mem, msg);
+ int ret;
+
+ BCM2835_MBOX_INIT_HDR(msg);
+ BCM2835_MBOX_INIT_TAG(&msg->get_arm_mem, GET_ARM_MEMORY);
+
+ ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
+ if (ret)
+ return ret;
+
+ *size = msg->get_arm_mem.body.resp.mem_size;
+
+ return 0;
+}
+
+static int rpi_register_clkdev(u32 clock_id, const char *name)
+{
+ BCM2835_MBOX_STACK_ALIGN(struct msg_get_clock_rate, msg);
+ struct clk *clk;
+ int ret;
+
+ BCM2835_MBOX_INIT_HDR(msg);
+ BCM2835_MBOX_INIT_TAG(&msg->get_clock_rate, GET_CLOCK_RATE);
+ msg->get_clock_rate.body.req.clock_id = clock_id;
+
+ ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
+ if (ret)
+ return ret;
+
+ clk = clk_fixed(name, msg->get_clock_rate.body.resp.rate_hz);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ if (!clk_register_clkdev(clk, NULL, name))
+ return -ENODEV;
+
+ return 0;
+}
+
+void rpi_set_usbethaddr(void)
+{
+ BCM2835_MBOX_STACK_ALIGN(struct msg_get_mac_address, msg);
+ int ret;
+
+ BCM2835_MBOX_INIT_HDR(msg);
+ BCM2835_MBOX_INIT_TAG(&msg->get_mac_address, GET_MAC_ADDRESS);
+
+ ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
+ if (ret) {
+ printf("bcm2835: Could not query MAC address\n");
+ /* Ignore error; not critical */
+ return;
+ }
+
+ eth_register_ethaddr(0, msg->get_mac_address.body.resp.mac);
+}
+
+struct gpio_led rpi_leds[] = {
+ {
+ .gpio = -EINVAL,
+ .led = {
+ .name = "ACT",
+ },
+ }, {
+ .gpio = -EINVAL,
+ .led = {
+ .name = "PWR",
+ },
+ },
+};
+
+void rpi_add_led(void)
+{
+ int i;
+ struct gpio_led *l;
+
+ for (i = 0; i < ARRAY_SIZE(rpi_leds); i++) {
+ l = &rpi_leds[i];
+
+ if (gpio_is_valid(l->gpio))
+ led_gpio_register(l);
+ }
+
+ l = &rpi_leds[0];
+ if (gpio_is_valid(l->gpio))
+ led_set_trigger(LED_TRIGGER_HEARTBEAT, &l->led);
+}
+
+void rpi_b_plus_init(void)
+{
+ rpi_leds[0].gpio = 47;
+ rpi_leds[1].gpio = 35;
+ rpi_set_usbethaddr();
+}
+
+static int rpi_board_rev = 0;
+
+static void rpi_get_board_rev(void)
+{
+ int ret;
+ char *name;
+
+ BCM2835_MBOX_STACK_ALIGN(struct msg_get_board_rev, msg);
+ BCM2835_MBOX_INIT_HDR(msg);
+ BCM2835_MBOX_INIT_TAG(&msg->get_board_rev, GET_BOARD_REV);
+
+ ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
+ if (ret) {
+ printf("bcm2835: Could not query board revision\n");
+ /* Ignore error; not critical */
+ return;
+ }
+
+ /* Comments from u-boot:
+ * For details of old-vs-new scheme, see:
+ * https://github.com/pimoroni/RPi.version/blob/master/RPi/version.py
+ * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=99293&p=690282
+ * (a few posts down)
+ *
+ * For the RPi 1, bit 24 is the "warranty bit", so we mask off just the
+ * lower byte to use as the board rev:
+ * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=98367&start=250
+ * http://www.raspberrypi.org/forums/viewtopic.php?f=31&t=20594
+ */
+ rpi_board_rev = msg->get_board_rev.body.resp.rev;
+ if (rpi_board_rev & 0x800000)
+ rpi_board_rev = (rpi_board_rev >> 4) & 0xff;
+ else
+ rpi_board_rev &= 0xff;
+ if (rpi_board_rev >= rpi_models_size) {
+ printf("RPI: Board rev %u outside known range\n",
+ rpi_board_rev);
+ goto unknown_rev;
+ }
+
+ if (!rpi_models[rpi_board_rev].name) {
+ printf("RPI: Board rev %u unknown\n", rpi_board_rev);
+ goto unknown_rev;
+ }
+
+ if (!rpi_board_rev)
+ goto unknown_rev;
+
+ name = asprintf("RaspberryPi %s %s", rpi_models[rpi_board_rev].name,
+ rpi_model_string);
+ barebox_set_model(name);
+ free(name);
+
+ return;
+
+unknown_rev:
+ rpi_board_rev = 0;
+ name = asprintf("RaspberryPi %s", rpi_model_string);
+ barebox_set_model(name);
+ free(name);
+}
+
+static void rpi_model_init(void)
+{
+ if (!rpi_models[rpi_board_rev].init)
+ return;
+
+ rpi_models[rpi_board_rev].init();
+ rpi_add_led();
+}
+
+static int rpi_mem_init(void)
+{
+ u32 size = 0;
+ int ret;
+
+ ret = rpi_get_arm_mem(&size);
+ if (ret)
+ printf("could not query ARM memory size\n");
+
+ bcm2835_add_device_sdram(size);
+
+ return ret;
+}
+mem_initcall(rpi_mem_init);
+
+static int rpi_console_init(void)
+{
+ rpi_get_board_rev();
+ barebox_set_hostname("rpi");
+
+ bcm2835_register_uart();
+ return 0;
+}
+console_initcall(rpi_console_init);
+
+static int rpi_clock_init(void)
+{
+ rpi_register_clkdev(BCM2835_MBOX_CLOCK_ID_EMMC, "bcm2835_mci0");
+ return 0;
+}
+postconsole_initcall(rpi_clock_init);
+
+static int rpi_env_init(void)
+{
+ struct stat s;
+ const char *diskdev = "/dev/disk0.0";
+ int ret;
+
+ device_detect_by_name("mci0");
+
+ ret = stat(diskdev, &s);
+ if (ret) {
+ printf("no %s. using default env\n", diskdev);
+ return 0;
+ }
+
+ mkdir("/boot", 0666);
+ ret = mount(diskdev, "fat", "/boot", NULL);
+ if (ret) {
+ printf("failed to mount %s\n", diskdev);
+ return 0;
+ }
+
+ default_environment_path_set("/boot/barebox.env");
+
+ return 0;
+}
+
+static int rpi_devices_init(void)
+{
+ rpi_model_init();
+ bcm2835_register_mci();
+ bcm2835_register_fb();
+ armlinux_set_architecture(MACH_TYPE_BCM2708);
+ rpi_env_init();
+ return 0;
+}
+late_initcall(rpi_devices_init);
diff --git a/arch/arm/boards/raspberry-pi/rpi.c b/arch/arm/boards/raspberry-pi/rpi.c
index faf48a5..dd2ad7f 100644
--- a/arch/arm/boards/raspberry-pi/rpi.c
+++ b/arch/arm/boards/raspberry-pi/rpi.c
@@ -13,161 +13,17 @@
*
*/
-#include <common.h>
-#include <init.h>
-#include <fs.h>
-#include <linux/stat.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <envfs.h>
-#include <malloc.h>
-#include <gpio.h>
-#include <net.h>
-#include <led.h>
-#include <asm/armlinux.h>
-#include <generated/mach-types.h>
-
-#include <mach/core.h>
-#include <mach/mbox.h>
-
-struct msg_get_arm_mem {
- struct bcm2835_mbox_hdr hdr;
- struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
- u32 end_tag;
-};
-
-struct msg_get_clock_rate {
- struct bcm2835_mbox_hdr hdr;
- struct bcm2835_mbox_tag_get_clock_rate get_clock_rate;
- u32 end_tag;
-};
-
-struct msg_get_board_rev {
- struct bcm2835_mbox_hdr hdr;
- struct bcm2835_mbox_tag_get_board_rev get_board_rev;
- u32 end_tag;
-};
-
-struct msg_get_mac_address {
- struct bcm2835_mbox_hdr hdr;
- struct bcm2835_mbox_tag_get_mac_address get_mac_address;
- u32 end_tag;
-};
-
-static int rpi_get_arm_mem(u32 *size)
-{
- BCM2835_MBOX_STACK_ALIGN(struct msg_get_arm_mem, msg);
- int ret;
-
- BCM2835_MBOX_INIT_HDR(msg);
- BCM2835_MBOX_INIT_TAG(&msg->get_arm_mem, GET_ARM_MEMORY);
-
- ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
- if (ret)
- return ret;
-
- *size = msg->get_arm_mem.body.resp.mem_size;
-
- return 0;
-}
-
-static int rpi_register_clkdev(u32 clock_id, const char *name)
-{
- BCM2835_MBOX_STACK_ALIGN(struct msg_get_clock_rate, msg);
- struct clk *clk;
- int ret;
-
- BCM2835_MBOX_INIT_HDR(msg);
- BCM2835_MBOX_INIT_TAG(&msg->get_clock_rate, GET_CLOCK_RATE);
- msg->get_clock_rate.body.req.clock_id = clock_id;
-
- ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
- if (ret)
- return ret;
-
- clk = clk_fixed(name, msg->get_clock_rate.body.resp.rate_hz);
- if (IS_ERR(clk))
- return PTR_ERR(clk);
-
- if (!clk_register_clkdev(clk, NULL, name))
- return -ENODEV;
-
- return 0;
-}
-
-static void rpi_set_usbethaddr(void)
-{
- BCM2835_MBOX_STACK_ALIGN(struct msg_get_mac_address, msg);
- int ret;
-
- BCM2835_MBOX_INIT_HDR(msg);
- BCM2835_MBOX_INIT_TAG(&msg->get_mac_address, GET_MAC_ADDRESS);
-
- ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
- if (ret) {
- printf("bcm2835: Could not query MAC address\n");
- /* Ignore error; not critical */
- return;
- }
-
- eth_register_ethaddr(0, msg->get_mac_address.body.resp.mac);
-}
-
-static struct gpio_led leds[] = {
- {
- .gpio = -EINVAL,
- .led = {
- .name = "ACT",
- },
- }, {
- .gpio = -EINVAL,
- .led = {
- .name = "PWR",
- },
- },
-};
-
-static void rpi_add_led(void)
-{
- int i;
- struct gpio_led *l;
-
- for (i = 0; i < ARRAY_SIZE(leds); i++) {
- l = &leds[i];
-
- if (gpio_is_valid(l->gpio))
- led_gpio_register(l);
- }
-
- l = &leds[0];
- if (gpio_is_valid(l->gpio))
- led_set_trigger(LED_TRIGGER_HEARTBEAT, &l->led);
-}
-
-static void rpi_b_plus_init(void)
-{
- leds[0].gpio = 47;
- leds[1].gpio = 35;
- rpi_set_usbethaddr();
-}
+#include "rpi.h"
static void rpi_b_init(void)
{
- leds[0].gpio = 16;
- leds[0].active_low = 1;
+ rpi_leds[0].gpio = 16;
+ rpi_leds[0].active_low = 1;
rpi_set_usbethaddr();
}
-#define RPI_MODEL(_id, _name, _init) \
- [_id] = { \
- .name = _name,\
- .init = _init,\
- }
/* See comments in mbox.h for data source */
-static const struct {
- const char *name;
- void (*init)(void);
-} models[] = {
+const struct rpi_model rpi_models[] = {
RPI_MODEL(0, "Unknown model", NULL),
RPI_MODEL(BCM2835_BOARD_REV_B_I2C0_2, "Model B (no P5)", rpi_b_init),
RPI_MODEL(BCM2835_BOARD_REV_B_I2C0_3, "Model B (no P5)", rpi_b_init),
@@ -184,141 +40,5 @@ static const struct {
RPI_MODEL(BCM2835_BOARD_REV_CM, "Compute Module", NULL),
RPI_MODEL(BCM2835_BOARD_REV_A_PLUS, "Model A+", NULL),
};
-
-static int rpi_board_rev = 0;
-
-static void rpi_get_board_rev(void)
-{
- int ret;
- char *name;
-
- BCM2835_MBOX_STACK_ALIGN(struct msg_get_board_rev, msg);
- BCM2835_MBOX_INIT_HDR(msg);
- BCM2835_MBOX_INIT_TAG(&msg->get_board_rev, GET_BOARD_REV);
-
- ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
- if (ret) {
- printf("bcm2835: Could not query board revision\n");
- /* Ignore error; not critical */
- return;
- }
-
- /* Comments from u-boot:
- * For details of old-vs-new scheme, see:
- * https://github.com/pimoroni/RPi.version/blob/master/RPi/version.py
- * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=99293&p=690282
- * (a few posts down)
- *
- * For the RPi 1, bit 24 is the "warranty bit", so we mask off just the
- * lower byte to use as the board rev:
- * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=98367&start=250
- * http://www.raspberrypi.org/forums/viewtopic.php?f=31&t=20594
- */
- rpi_board_rev = msg->get_board_rev.body.resp.rev;
- if (rpi_board_rev & 0x800000)
- rpi_board_rev = (rpi_board_rev >> 4) & 0xff;
- else
- rpi_board_rev &= 0xff;
- if (rpi_board_rev >= ARRAY_SIZE(models)) {
- printf("RPI: Board rev %u outside known range\n",
- rpi_board_rev);
- goto unknown_rev;
- }
-
- if (!models[rpi_board_rev].name) {
- printf("RPI: Board rev %u unknown\n", rpi_board_rev);
- goto unknown_rev;
- }
-
- if (!rpi_board_rev)
- goto unknown_rev;
-
- name = asprintf("RaspberryPi %s (BCM2835/ARM1176JZF-S)",
- models[rpi_board_rev].name);
- barebox_set_model(name);
- free(name);
-
- return;
-
-unknown_rev:
- rpi_board_rev = 0;
- barebox_set_model("RaspberryPi (BCM2835/ARM1176JZF-S)");
-}
-
-static void rpi_model_init(void)
-{
- if (!models[rpi_board_rev].init)
- return;
-
- models[rpi_board_rev].init();
- rpi_add_led();
-}
-
-static int rpi_mem_init(void)
-{
- u32 size = 0;
- int ret;
-
- ret = rpi_get_arm_mem(&size);
- if (ret)
- printf("could not query ARM memory size\n");
-
- bcm2835_add_device_sdram(size);
-
- return ret;
-}
-mem_initcall(rpi_mem_init);
-
-static int rpi_console_init(void)
-{
- rpi_get_board_rev();
- barebox_set_hostname("rpi");
-
- bcm2835_register_uart();
- return 0;
-}
-console_initcall(rpi_console_init);
-
-static int rpi_clock_init(void)
-{
- rpi_register_clkdev(BCM2835_MBOX_CLOCK_ID_EMMC, "bcm2835_mci0");
- return 0;
-}
-postconsole_initcall(rpi_clock_init);
-
-static int rpi_env_init(void)
-{
- struct stat s;
- const char *diskdev = "/dev/disk0.0";
- int ret;
-
- device_detect_by_name("mci0");
-
- ret = stat(diskdev, &s);
- if (ret) {
- printf("no %s. using default env\n", diskdev);
- return 0;
- }
-
- mkdir("/boot", 0666);
- ret = mount(diskdev, "fat", "/boot", NULL);
- if (ret) {
- printf("failed to mount %s\n", diskdev);
- return 0;
- }
-
- default_environment_path_set("/boot/barebox.env");
-
- return 0;
-}
-
-static int rpi_devices_init(void)
-{
- rpi_model_init();
- bcm2835_register_mci();
- bcm2835_register_fb();
- armlinux_set_architecture(MACH_TYPE_BCM2708);
- rpi_env_init();
- return 0;
-}
-late_initcall(rpi_devices_init);
+const size_t rpi_models_size = ARRAY_SIZE(rpi_models);
+const char *rpi_model_string = "(BCM2835/ARM1176JZF-S)";
diff --git a/arch/arm/boards/raspberry-pi/rpi.h b/arch/arm/boards/raspberry-pi/rpi.h
new file mode 100644
index 0000000..739cdee
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/rpi.h
@@ -0,0 +1,28 @@
+#ifndef __ARCH_ARM_BOARDS_RPI_H__
+#define __ARCH_ARM_BOARDS_RPI_H__
+
+#include <types.h>
+#include <led.h>
+
+#include <mach/mbox.h>
+
+#define RPI_MODEL(_id, _name, _init) \
+ [_id] = { \
+ .name = _name,\
+ .init = _init,\
+ }
+
+struct rpi_model {
+ const char *name;
+ void (*init)(void);
+};
+
+extern const struct rpi_model rpi_models[];
+extern const size_t rpi_models_size;
+extern const char *rpi_model_string;
+extern struct gpio_led rpi_leds[];
+
+void rpi_b_plus_init(void);
+void rpi_set_usbethaddr(void);
+
+#endif /* __ARCH_ARM_BOARDS_RPI_H__ */
diff --git a/arch/arm/boards/raspberry-pi/rpi2.c b/arch/arm/boards/raspberry-pi/rpi2.c
new file mode 100644
index 0000000..2cfc06f
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/rpi2.c
@@ -0,0 +1,21 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include "rpi.h"
+
+const struct rpi_model rpi_models[] = {
+ RPI_MODEL(0, "Unknown model", NULL),
+ RPI_MODEL(BCM2836_BOARD_REV_2_B, "2 Model B", rpi_b_plus_init),
+};
+const size_t rpi_models_size = ARRAY_SIZE(rpi_models);
+const char *rpi_model_string = "(BCM2836/CORTEX-A7)";
diff --git a/arch/arm/configs/rpi2_defconfig b/arch/arm/configs/rpi2_defconfig
new file mode 100644
index 0000000..81f821a
--- /dev/null
+++ b/arch/arm/configs/rpi2_defconfig
@@ -0,0 +1,72 @@
+CONFIG_ARCH_BCM2836=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ARM_UNWIND=y
+CONFIG_MMU=y
+CONFIG_MALLOC_TLSF=y
+CONFIG_KALLSYMS=y
+CONFIG_PROMPT="R-Pi> "
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_BLSPEC=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/raspberry-pi/env"
+CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_VERBOSE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_LOADY=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_UIMAGE=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_FILETYPE=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_CMD_LET=y
+CONFIG_CMD_MSLEEP=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_LOGIN=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_PASSWD=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_MM=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DETECT=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_OF_PROPERTY=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIME=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_MCI=y
+CONFIG_MCI_BCM283X=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_TRIGGERS=y
+CONFIG_GPIO_BCM283X=y
+CONFIG_REGULATOR=y
+CONFIG_FS_EXT4=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
+CONFIG_DIGEST_SHA1_GENERIC=y
+CONFIG_DIGEST_SHA256_GENERIC=y
diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
index f4a7e67..e861268 100644
--- a/arch/arm/mach-bcm283x/Kconfig
+++ b/arch/arm/mach-bcm283x/Kconfig
@@ -4,12 +4,21 @@ config ARCH_TEXT_BASE
hex
default 0x04000000
+config MACH_RPI_COMMON
+ bool
+
choice
prompt "Broadcom Board type"
config MACH_RPI
bool "RaspberryPi (BCM2835/ARM1176JZF-S)"
depends on ARCH_BCM2835
+ select MACH_RPI_COMMON
+
+config MACH_RPI2
+ bool "RaspberryPi 2 (BCM2836/CORTEX-A7)"
+ depends on ARCH_BCM2836
+ select MACH_RPI_COMMON
endchoice
diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
index 09b31f2..cd9ee1f 100644
--- a/arch/arm/mach-bcm283x/include/mach/mbox.h
+++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
@@ -11,6 +11,8 @@
#include <common.h>
+#include <mach/platform.h>
+
/*
* The BCM2835 SoC contains (at least) two CPUs; the VideoCore (a/k/a "GPU")
* and the ARM CPU. The ARM CPU is often thought of as the main CPU.
@@ -40,7 +42,7 @@
/* Raw mailbox HW */
-#define BCM2835_MBOX_PHYSADDR 0x2000b880
+#define BCM2835_MBOX_PHYSADDR (BCM2835_ARM_BASE + 0x880)
struct bcm2835_mbox_regs {
u32 read;
@@ -73,8 +75,6 @@ struct bcm2835_mbox_hdr {
#define BCM2835_MBOX_REQ_CODE 0
#define BCM2835_MBOX_RESP_CODE_SUCCESS 0x80000000
-#define BCM2835_CACHELINE_SIZE 32
-
#define BCM2835_MBOX_STACK_ALIGN(type, name) \
STACK_ALIGN_ARRAY(type, name, 1, BCM2835_CACHELINE_SIZE)
@@ -128,6 +128,9 @@ struct bcm2835_mbox_tag_hdr {
#define BCM2835_MBOX_TAG_GET_BOARD_REV 0x00010002
+/* RPi 2 */
+#define BCM2836_BOARD_REV_2_B 0x4
+
/*
* 0x2..0xf from:
* http://raspberryalphaomega.org.uk/2013/02/06/automatic-raspberry-pi-board-revision-detection-model-a-b1-and-b2/
diff --git a/arch/arm/mach-bcm283x/include/mach/platform.h b/arch/arm/mach-bcm283x/include/mach/platform.h
index e55085a..3b73831 100644
--- a/arch/arm/mach-bcm283x/include/mach/platform.h
+++ b/arch/arm/mach-bcm283x/include/mach/platform.h
@@ -28,7 +28,16 @@
* This file is manually generated.
*/
+#ifdef CONFIG_ARCH_BCM2835
#define BCM2835_PERI_BASE 0x20000000
+#define BCM2835_CACHELINE_SIZE 32
+#elif defined CONFIG_ARCH_BCM2836
+#define BCM2835_PERI_BASE 0x3f000000
+#define BCM2835_CACHELINE_SIZE 64
+#else
+#error "no CONFIG_ARCH_BCM283X defined"
+#endif
+
#define BCM2835_ST_BASE (BCM2835_PERI_BASE + 0x3000) /* System Timer */
#define BCM2835_DMA_BASE (BCM2835_PERI_BASE + 0x7000) /* DMA controller */
#define BCM2835_ARM_BASE (BCM2835_PERI_BASE + 0xB000) /* BCM2708 ARM control block */
--
2.6.1
More information about the barebox
mailing list