On Mon, 7 Dec 2015 11:27:44 +0100
Sascha Hauer <s.hauer at pengutronix.de> wrote:
> On Sun, Dec 06, 2015 at 05:50:51PM +0300, Antony Pavlov wrote:
> > On Fri, 4 Sep 2015 08:20:48 +0200
> > Sascha Hauer <s.hauer at pengutronix.de> wrote:
> >
> > > On Fri, Aug 28, 2015 at 06:46:14PM +0300, Antony Pavlov wrote:
> > > > On Fri, 28 Aug 2015 08:34:32 +0200
> > > > Sascha Hauer <s.hauer at pengutronix.de> wrote:
> > > >
> > > > > On Fri, Aug 28, 2015 at 01:24:04AM +0300, Antony Pavlov wrote:
> > > > > > N.B. phys_to_virt() translates phys address
> > > > > > to KSEG1 (uncached) address as barebox mips
> > > > > > has no cache support.
> > > > >
> > > > > What would it take to implement cache support for mips?
> > > > lack of the cache support is critical problem for current barebox mips support.
> > > > I'm planning to add cache support in several weeks.
> > > > This task needs much test efforts for different boards.
> > > >
> > > > Anyway I can't carry out cache adding work at one.
> > > > But adding virt_to_phys and DMA support will help to add cache support one day anyway.
> > >
> > > Looking at this again the virt_to_phys/phys_to_virt macros are not
> > > necessary. dma_alloc_coherent() already returns both the virtual address
> > > and the DMA address. It should be possible to replace DMA_ADDRESS_BROKEN
> > > in the ehci driver with a real pointer and use it appropriatly in the
> > > driver.
> > >
> >
> > I have tried to get physical address from dma_alloc_coherent(),
> > here is a small part of my patch (just for demonstration):
> >
> > --- a/drivers/usb/host/ehci-hcd.c
> > +++ b/drivers/usb/host/ehci-hcd.c
> > @@ -41,6 +41,7 @@ struct ehci_priv {
> > struct ehci_hcor *hcor;
> > struct usb_host host;
> > struct QH *qh_list;
> > + dma_addr_t qh_list_dma;
> > struct qTD *td;
> > int portreset;
> > unsigned long flags;
> > @@ -403,7 +410,7 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
> > goto fail;
> > }
> >
> > - ehci->qh_list->qh_link = cpu_to_hc32((uint32_t)ehci->qh_list | QH_LINK_TYPE_QH);
> > + ehci->qh_list->qh_link = cpu_to_hc32(ehci->qh_list_dma | QH_LINK_TYPE_QH);
> >
> > token = hc32_to_cpu(qh->qt_token);
> > if (!(token & 0x80)) {
> > @@ -1306,7 +1313,7 @@ int ehci_register(struct device_d *dev, struct ehci_data *data)
> > ehci->post_init = data->post_init;
> >
> > ehci->qh_list = dma_alloc_coherent(sizeof(struct QH) * NUM_TD,
> > - DMA_ADDRESS_BROKEN);
> > + &ehci->qh_list_dma);
> > ehci->periodic_queue = dma_alloc_coherent(sizeof(struct QH),
> > DMA_ADDRESS_BROKEN);
> > ehci->td = dma_alloc_coherent(sizeof(struct qTD) * NUM_TD,
> >
> >
> > However ehci_td_buffer() gets buf pointer outside of ehci driver (e.g. via usb_bulk_msg()),
> > so it is difficult to avoid virt_to_phys() in ehci_td_buffer(), e.g.:
> >
> > @@ -195,7 +197,7 @@ static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz)
> >
> > idx = 0;
> > while (idx < 5) {
> > - td->qt_buffer[idx] = cpu_to_hc32(addr);
> > + td->qt_buffer[idx] = cpu_to_hc32(virt_to_phys(addr));
> > next = (addr + 4096) & ~4095;
> > delta = next - addr;
> > if (delta >= sz)
> >
> > Have you any idea?
>
> No. Translating this addres into a physical address seems unavoidable
> here. I would still prefer a real cache implementation for MIPS though.
> Have you looked further into that? The current MIPS cached/uncached
> memory windows seem to be a constant source of problems we could avoid.
We already have Atheros AR9331 branch with cache support.
I assume that cleaned MIPS cache support patch series will be ready till Christmas.
--
Best regards,
Antony Pavlov