[PATCH] usb: ehci-hcd: initialize ehci->qh_list[] with zeros

[Sascha Hauer]

On Tue, Aug 25, 2015 at 01:33:56PM +0300, Peter Mamonov wrote:
> Without this initialization ehci->qh_list[0].qh_endpt2 is left uninitialized,
> which causes problems with some EHCI host controllers.
> 
> Das u-boot uses the same strategy:
> 
> 	static int ehci_common_init(struct ehci_ctrl *ctrl, uint tweaks)
> 	{
> 		...
> 		qh_list = &ctrl->qh_list;
> 
> 		/* Set head of reclaim list */
> 		memset(qh_list, 0, sizeof(*qh_list));
> 		qh_list->qh_link = cpu_to_hc32((unsigned long)qh_list | QH_LINK_TYPE_QH);
> 		qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) |
> 							QH_ENDPT1_EPS(USB_SPEED_HIGH));
> 		qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
> 		qh_list->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
> 		qh_list->qh_overlay.qt_token =
> 				cpu_to_hc32(QT_TOKEN_STATUS(QT_TOKEN_STATUS_HALTED));
> 		...
> 	}
> 
> Signed-off-by: Peter Mamonov <pmamonov at gmail.com>

Applied, thanks

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |