[PATCH 0/2] mvebu: Openblocks A6 board support

[Sebastian Hesselbarth]

On 08/23/2014 10:19 PM, Ezequiel Garcia wrote:
> This two-piece patchset adds support for Plat'home's Openblocks A6 board [1].
> To make it a little more interesting, NAND support (ported from Linux) is
> included.
> 
> Let's hope we can see USB and SATA soon!
> 
> [1] http://openblocks.plathome.com/products/a6/
> 
> Ezequiel Garcia (2):
>   nand: Add Marvell Orion NAND driver
>   ARM: mvebu: Add Plathome Kirkwood Openblocks A6 board support
> 
>  arch/arm/boards/Makefile                          |   1 +
>  arch/arm/boards/plathome-openblocks-a6/Makefile   |   2 +
>  arch/arm/boards/plathome-openblocks-a6/board.c    |   1 +
>  arch/arm/boards/plathome-openblocks-a6/lowlevel.c |  32 +++++

Ezequiel,

this patch set is missing

arch/arm/boards/plathome-openblocks-a6/kwbimage.cfg

Can you please prepare a patch adding the missing kwbimage.cfg?

Sebastian

>  arch/arm/dts/Makefile                             |   1 +
>  arch/arm/dts/kirkwood-openblocks_a6-bb.dts        |  13 ++
>  arch/arm/mach-mvebu/Kconfig                       |   3 +
>  drivers/mtd/nand/Kconfig                          |   7 +
>  drivers/mtd/nand/Makefile                         |   1 +
>  drivers/mtd/nand/nand_orion.c                     | 162 ++++++++++++++++++++++
>  images/Makefile.mvebu                             |  11 ++
>  11 files changed, 234 insertions(+)
>  create mode 100644 arch/arm/boards/plathome-openblocks-a6/Makefile
>  create mode 100644 arch/arm/boards/plathome-openblocks-a6/board.c
>  create mode 100644 arch/arm/boards/plathome-openblocks-a6/lowlevel.c
>  create mode 100644 arch/arm/dts/kirkwood-openblocks_a6-bb.dts
>  create mode 100644 drivers/mtd/nand/nand_orion.c
>