[PATCH] ARM: nitrogen6x: remove VPU/IPU QoS from DCD

Lucas Stach dev at lynxeye.de
Thu Apr 24 13:22:46 PDT 2014


From: Lucas Stach <l.stach at pengutronix.de>

Not needed anymore, as barebox sets this up itself now.

Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
 .../boundarydevices-nitrogen6x/flash-header-nitrogen6x-1g.imxcfg     | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/arm/boards/boundarydevices-nitrogen6x/flash-header-nitrogen6x-1g.imxcfg b/arch/arm/boards/boundarydevices-nitrogen6x/flash-header-nitrogen6x-1g.imxcfg
index 60a39fe..b6c7580 100644
--- a/arch/arm/boards/boundarydevices-nitrogen6x/flash-header-nitrogen6x-1g.imxcfg
+++ b/arch/arm/boards/boundarydevices-nitrogen6x/flash-header-nitrogen6x-1g.imxcfg
@@ -99,8 +99,3 @@ wm 32 0x020c4074 0x3ff00000
 wm 32 0x020c4078 0x00fff300
 wm 32 0x020c407c 0x0f0000c3
 wm 32 0x020c4080 0x000003ff
-/* enable AXI cache for VDOA/VPU/IPU */
-wm 32 0x020e0010 0xf00000cf
-/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7 */
-wm 32 0x020e0018 0x007f007f
-wm 32 0x020e001c 0x007f007f
-- 
1.9.0




More information about the barebox mailing list