[PATCH] USB: Check init/post_init errors

[Sascha Hauer]

On Mon, Oct 21, 2013 at 12:24:22PM +0400, Alexander Shiyan wrote:
> Host with inoperable ULPI able to bring the system into an
> infinite loop. The patch adds error checking during initialization
> to avoid this.
> 
> Signed-off-by: Alexander Shiyan <shc_work at mail.ru>

Applied, thanks

Sascha

> ---
>  drivers/usb/host/ehci-hcd.c | 12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
> index cb6a592..2da3edd 100644
> --- a/drivers/usb/host/ehci-hcd.c
> +++ b/drivers/usb/host/ehci-hcd.c
> @@ -748,6 +748,7 @@ static int ehci_init(struct usb_host *host)
>  	struct ehci_priv *ehci = to_ehci(host);
>  	uint32_t reg;
>  	uint32_t cmd;
> +	int ret = 0;
>  
>  	ehci_halt(ehci);
>  
> @@ -755,8 +756,11 @@ static int ehci_init(struct usb_host *host)
>  	if (ehci_reset(ehci) != 0)
>  		return -1;
>  
> -	if (ehci->init)
> -		ehci->init(ehci->drvdata);
> +	if (ehci->init) {
> +		ret = ehci->init(ehci->drvdata);
> +		if (ret)
> +			return ret;
> +	}
>  
>  	ehci->qh_list->qh_link = cpu_to_hc32((uint32_t)ehci->qh_list | QH_LINK_TYPE_QH);
>  	ehci->qh_list->qh_endpt1 = cpu_to_hc32((1 << 15) | (USB_SPEED_HIGH << 12));
> @@ -799,9 +803,9 @@ static int ehci_init(struct usb_host *host)
>  	ehci->rootdev = 0;
>  
>  	if (ehci->post_init)
> -		ehci->post_init(ehci->drvdata);
> +		ret = ehci->post_init(ehci->drvdata);
>  
> -	return 0;
> +	return ret;
>  }
>  
>  static int
> -- 
> 1.8.1.5
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |