[PATCH 16/17] ARM: OMAP: introduce multiboard support and move am33xx boards to it

[Sascha Hauer]

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/configs/am335x_beaglebone_defconfig     |  1 +
 arch/arm/configs/am335x_beaglebone_mlo_defconfig |  1 +
 arch/arm/configs/pcm051_defconfig                |  1 +
 arch/arm/configs/pcm051_mlo_defconfig            |  1 +
 arch/arm/mach-omap/Kconfig                       | 36 ++++++++++++++----------
 5 files changed, 25 insertions(+), 15 deletions(-)

diff --git a/arch/arm/configs/am335x_beaglebone_defconfig b/arch/arm/configs/am335x_beaglebone_defconfig
index 38e19ef..857b89c 100644
--- a/arch/arm/configs/am335x_beaglebone_defconfig
+++ b/arch/arm/configs/am335x_beaglebone_defconfig
@@ -1,4 +1,5 @@
 CONFIG_ARCH_OMAP=y
+CONFIG_OMAP_MULTI_BOARDS=y
 CONFIG_MACH_BEAGLEBONE=y
 CONFIG_THUMB2_BAREBOX=y
 CONFIG_CMD_ARM_MMUINFO=y
diff --git a/arch/arm/configs/am335x_beaglebone_mlo_defconfig b/arch/arm/configs/am335x_beaglebone_mlo_defconfig
index ac682cc..905cc6d 100644
--- a/arch/arm/configs/am335x_beaglebone_mlo_defconfig
+++ b/arch/arm/configs/am335x_beaglebone_mlo_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARCH_OMAP=y
 # CONFIG_OMAP_GPMC is not set
 CONFIG_OMAP_BUILD_IFT=y
+CONFIG_OMAP_MULTI_BOARDS=y
 CONFIG_MACH_BEAGLEBONE=y
 CONFIG_THUMB2_BAREBOX=y
 # CONFIG_CMD_ARM_CPUINFO is not set
diff --git a/arch/arm/configs/pcm051_defconfig b/arch/arm/configs/pcm051_defconfig
index 949c82f..d7e510b 100644
--- a/arch/arm/configs/pcm051_defconfig
+++ b/arch/arm/configs/pcm051_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARCH_OMAP=y
 CONFIG_BAREBOX_UPDATE_AM33XX_SPI_NOR_MLO=y
+CONFIG_OMAP_MULTI_BOARDS=y
 CONFIG_MACH_PCM051=y
 CONFIG_THUMB2_BAREBOX=y
 CONFIG_ARM_BOARD_APPEND_ATAG=y
diff --git a/arch/arm/configs/pcm051_mlo_defconfig b/arch/arm/configs/pcm051_mlo_defconfig
index dc4165a..ae5764b 100644
--- a/arch/arm/configs/pcm051_mlo_defconfig
+++ b/arch/arm/configs/pcm051_mlo_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARCH_OMAP=y
 CONFIG_OMAP_BUILD_IFT=y
+CONFIG_OMAP_MULTI_BOARDS=y
 CONFIG_MACH_PCM051=y
 CONFIG_THUMB2_BAREBOX=y
 # CONFIG_CMD_ARM_CPUINFO is not set
diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
index 3a53333..12b9c1f 100644
--- a/arch/arm/mach-omap/Kconfig
+++ b/arch/arm/mach-omap/Kconfig
@@ -114,8 +114,29 @@ config CMD_BOOT_ORDER
 	help
 	  A command to choose the next boot device on a warm reset.
 
+config OMAP_MULTI_BOARDS
+	bool "Allow multiple boards to be selected"
+	select HAVE_DEFAULT_ENVIRONMENT_NEW
+	select HAVE_PBL_MULTI_IMAGES
+
+if OMAP_MULTI_BOARDS
+
+config MACH_BEAGLEBONE
+	bool "Texas Instrument's Beagle Bone"
+	select ARCH_AM33XX
+	help
+	  Say Y here if you are using Beagle Bone
+
+config MACH_PCM051
+	bool "Phytec phyCORE pcm051"
+	select ARCH_AM33XX
+	help
+	  Say Y here if you are using Phytecs phyCORE pcm051 board
+endif
+
 choice
 	prompt "Select OMAP board"
+	depends on !OMAP_MULTI_BOARDS
 
 config MACH_OMAP343xSDP
 	bool "Texas Instrument's SDP343x"
@@ -130,13 +151,6 @@ config MACH_BEAGLE
 	help
 	  Say Y here if you are using Beagle Board
 
-config MACH_BEAGLEBONE
-	bool "Texas Instrument's Beagle Bone"
-	select ARCH_AM33XX
-	select HAVE_PBL_MULTI_IMAGES
-	help
-	  Say Y here if you are using Beagle Bone
-
 config MACH_OMAP3EVM
 	bool "Texas Instrument's OMAP3 EVM"
 	select ARCH_OMAP3
@@ -175,14 +189,6 @@ config MACH_PCAAXL2
 	help
 	  Say Y here if you are using a phyCARD-A-XL1 PCA-A-XL1
 
-config MACH_PCM051
-	bool "Phytec phyCORE pcm051"
-	select HAVE_DEFAULT_ENVIRONMENT_NEW
-	select ARCH_AM33XX
-	select HAVE_PBL_MULTI_IMAGES
-	help
-	  Say Y here if you are using Phytecs phyCORE pcm051 board
-
 endchoice
 
 if ARCH_OMAP
-- 
1.8.4.2