[PATCH 0/3 v2] Support for Voipac X53-DMM-668 module and Voipac Baseboard

[Rostislav Lisovy]

This patchset adds support for Voipac Baseboard using x53-dmm-668
module (equipped with i.mx53 CPU). More info about the module may
be found at: http://www.voipac.com/#X53-DMM-668

Changes since v1:
* Fixed error checking in fec_imx.c
* Board support is now done in the 'multiboard way'

Rostislav Lisovy (3):
  ARM: dts: i.mx53: Internal keyboard controller + i2c pinmux
  ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree
  ARM: i.mx53: Support for Voipac board with X53-DMM-668 module.

 arch/arm/boards/Makefile                           |    1 +
 arch/arm/boards/freescale-mx53-vmx53/Makefile      |    3 +
 arch/arm/boards/freescale-mx53-vmx53/board.c       |   42 +++++
 .../boards/freescale-mx53-vmx53/env/config-board   |    8 +
 .../flash-header-imx53-vmx53.imxcfg                |   54 ++++++
 arch/arm/boards/freescale-mx53-vmx53/lowlevel.c    |   19 ++
 arch/arm/dts/Makefile                              |    4 +-
 arch/arm/dts/imx53-voipac-bsb.dts                  |  135 ++++++++++++++
 arch/arm/dts/imx53-voipac-dmm-668.dtsi             |  196 ++++++++++++++++++++
 arch/arm/dts/imx53.dtsi                            |   15 ++
 arch/arm/mach-imx/Kconfig                          |    8 +
 drivers/net/fec_imx.c                              |   33 ++++
 images/Makefile.imx                                |    5 +
 13 files changed, 522 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boards/freescale-mx53-vmx53/Makefile
 create mode 100644 arch/arm/boards/freescale-mx53-vmx53/board.c
 create mode 100644 arch/arm/boards/freescale-mx53-vmx53/env/config-board
 create mode 100644 arch/arm/boards/freescale-mx53-vmx53/flash-header-imx53-vmx53.imxcfg
 create mode 100644 arch/arm/boards/freescale-mx53-vmx53/lowlevel.c
 create mode 100644 arch/arm/dts/imx53-voipac-bsb.dts
 create mode 100644 arch/arm/dts/imx53-voipac-dmm-668.dtsi

-- 
1.7.10.4