[PATCH 1/1] Revert "nand_base: detect more ONFI flash"

[Jean-Christophe PLAGNIOL-VILLARD]

On 18:25 Wed 08 May     , Eric Bénard wrote:
> Hi Jean-Christophe,
> 
> Le Wed, 8 May 2013 15:30:24 +0800,
> Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com> a écrit :
> 
> > 
> > On May 8, 2013, at 1:11 PM, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> > 
> > > On Tue, May 07, 2013 at 10:21:39PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > >> this brake the nand support on at91sam9x5ek
> > >> where we have a non compliant ONFI nand
> > >> NAND device: Manufacturer ID: 0xad, Chip ID: 0xda (Hynix NAND 256MiB 3,3V 8-bit), 256MiB, page size: 2048, OOB size: 64
> > >> 
> > >> This reverts commit 4c2bdc8728016b3412523e3264651651fe752860.
> > > 
> > > Thank you for letting us know that this patch causes a regression for
> > > you. I this happens, please first try and fix the regression. If that
> > > doesn't work please tell us what about the original patch is so wrong
> > > that it needs to be reverted. With a good explanation it could be that
> > > someone else has an idea. And whatever you do, put the original author,
> > > Eric in this case, on Cc.
> > 
> > This commit was supposed just able to detect that a Nand is ONFI
> > 
> > but instead it brake supported Nand
> > 
> > So Eric can fix it but I've not time to debug this before 1 month
> > and the few platform that use ONFI are all busy
> > 
> > So as the commit just allow to detect a band is ONFI can we revert it
> > 
> > to keep non-ONFI Nand to work
> > 
> IIRC, I tested this patch on some i.MX board with non ONFI NAND flash
> and that worked fine unless I made a mistake in my tests which is
> always possible.
> 
> I've just sent a patch which may fix your problem, please give it a try
> (only compile tested, not tested on real hardware).
ok will try
> 
> Eric
>