[PATCH v4 0/5] ARM: add support for Zynq

[Steffen Trumtrar]

Hi!

This is mostly a repost of v3. Only changes are in 4/5.
The final image now gets always piped through zynq_mkimage. This is needed
anyway, so do it always.
This tool will eventually replace all the flash_header linker stuff, although
it is pretty simple on the Zynq.

Regards,
Steffen

Steffen Trumtrar (5):
  serial: Add driver for Cadence UART
  ARM: zynq: Add new architecture zynq
  ARM: zynq: add clk support for zynq7000
  ARM: zynq: add zynq fsbl checksum script
  ARM: zynq: Add support for the Avnet Zedboard

 .gitignore                                         |   1 +
 arch/arm/Kconfig                                   |   5 +
 arch/arm/Makefile                                  |  10 +
 arch/arm/boards/avnet-zedboard/Makefile            |   3 +
 arch/arm/boards/avnet-zedboard/board.c             |  38 ++
 arch/arm/boards/avnet-zedboard/config.h            |   4 +
 .../boards/avnet-zedboard/env/init/config-board    |   7 +
 arch/arm/boards/avnet-zedboard/flash_header.c      |  62 +++
 arch/arm/boards/avnet-zedboard/lowlevel.c          | 252 +++++++++++++
 arch/arm/configs/zedboard_defconfig                |  49 +++
 arch/arm/mach-zynq/Kconfig                         |  38 ++
 arch/arm/mach-zynq/Makefile                        |   1 +
 arch/arm/mach-zynq/clk-zynq7000.c                  | 417 +++++++++++++++++++++
 arch/arm/mach-zynq/devices.c                       |   8 +
 arch/arm/mach-zynq/include/mach/barebox.lds.h      |   8 +
 arch/arm/mach-zynq/include/mach/clkdev.h           |   6 +
 arch/arm/mach-zynq/include/mach/debug_ll.h         |  37 ++
 arch/arm/mach-zynq/include/mach/devices.h          |  13 +
 .../arm/mach-zynq/include/mach/zynq-flash-header.h |  38 ++
 arch/arm/mach-zynq/include/mach/zynq7000-regs.h    | 132 +++++++
 arch/arm/mach-zynq/zynq.c                          |  56 +++
 drivers/serial/Kconfig                             |   5 +
 drivers/serial/Makefile                            |   1 +
 drivers/serial/serial_cadence.c                    | 307 +++++++++++++++
 include/asm-generic/barebox.lds.h                  |   3 +-
 scripts/.gitignore                                 |   1 +
 scripts/Makefile                                   |   1 +
 scripts/zynq_mkimage.c                             |  86 +++++
 28 files changed, 1588 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boards/avnet-zedboard/Makefile
 create mode 100644 arch/arm/boards/avnet-zedboard/board.c
 create mode 100644 arch/arm/boards/avnet-zedboard/config.h
 create mode 100644 arch/arm/boards/avnet-zedboard/env/init/config-board
 create mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c
 create mode 100644 arch/arm/boards/avnet-zedboard/lowlevel.c
 create mode 100644 arch/arm/configs/zedboard_defconfig
 create mode 100644 arch/arm/mach-zynq/Kconfig
 create mode 100644 arch/arm/mach-zynq/Makefile
 create mode 100644 arch/arm/mach-zynq/clk-zynq7000.c
 create mode 100644 arch/arm/mach-zynq/devices.c
 create mode 100644 arch/arm/mach-zynq/include/mach/barebox.lds.h
 create mode 100644 arch/arm/mach-zynq/include/mach/clkdev.h
 create mode 100644 arch/arm/mach-zynq/include/mach/debug_ll.h
 create mode 100644 arch/arm/mach-zynq/include/mach/devices.h
 create mode 100644 arch/arm/mach-zynq/include/mach/zynq-flash-header.h
 create mode 100644 arch/arm/mach-zynq/include/mach/zynq7000-regs.h
 create mode 100644 arch/arm/mach-zynq/zynq.c
 create mode 100644 drivers/serial/serial_cadence.c
 create mode 100644 scripts/zynq_mkimage.c

-- 
1.8.2.rc2