[PATCH 1/2] net: macb: remove gem_recv and reorder probe

Steffen Trumtrar s.trumtrar at pengutronix.de
Wed Mar 13 04:48:13 EDT 2013


The function gem_recv implements a buffer "ring" that stops at filling level 10.
That means, when the driver is used as gem, it stops receiving after exactly
10 packets. Instead of implementing macb_recv twice, use it also for the gem
part. If there needs to be an extra recv function for the gigabit case, it can
be added than.
Also, first set the type of device (macb or gem) and then use functions that
use this info.

Tested on a Zynq7000.

Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
 drivers/net/macb.c | 47 +++++++----------------------------------------
 1 file changed, 7 insertions(+), 40 deletions(-)

diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 8602437..a12eea7 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -169,37 +169,6 @@ static void reclaim_rx_buffers(struct macb_device *macb,
 	macb->rx_tail = new_tail;
 }
 
-static int gem_recv(struct eth_device *edev)
-{
-	struct macb_device *macb = edev->priv;
-	unsigned int rx_tail = macb->rx_tail;
-	void *buffer;
-	int length;
-	u32 status;
-
-	dev_dbg(macb->dev, "%s\n", __func__);
-
-	for (;;) {
-		barrier();
-		if (!(macb->rx_ring[rx_tail].addr & MACB_BIT(RX_USED)))
-			return -1;
-
-		barrier();
-		status = macb->rx_ring[rx_tail].ctrl;
-		length = MACB_BFEXT(RX_FRMLEN, status);
-		if (status & MACB_BIT(RX_SOF)) {
-			buffer = macb->rx_buffer + macb->rx_buffer_size * macb->rx_tail;
-			net_receive(buffer, length);
-			macb->rx_ring[rx_tail].ctrl &= ~MACB_BIT(RX_USED);
-			barrier();
-		}
-		rx_tail++;
-		macb->rx_tail++;
-	}
-
-	return 0;
-}
-
 static int macb_recv(struct eth_device *edev)
 {
 	struct macb_device *macb = edev->priv;
@@ -619,11 +588,6 @@ static int macb_probe(struct device_d *dev)
 
 	macb->phy_flags = pdata->phy_flags;
 
-	macb_init_rx_buffer_size(macb, PKTSIZE);
-	macb->rx_buffer = dma_alloc_coherent(macb->rx_buffer_size * macb->rx_ring_size);
-	macb->rx_ring = dma_alloc_coherent(RX_RING_BYTES(macb));
-	macb->tx_ring = dma_alloc_coherent(TX_RING_BYTES);
-
 	macb->regs = dev_request_mem_region(dev, 0);
 
 	/*
@@ -638,12 +602,15 @@ static int macb_probe(struct device_d *dev)
 
 	clk_enable(macb->pclk);
 
-	if (macb_is_gem(macb))
-		edev->recv = gem_recv;
-	else
-		edev->recv = macb_recv;
 	macb->is_gem = read_is_gem(macb);
 
+	macb_init_rx_buffer_size(macb, PKTSIZE);
+	macb->rx_buffer = dma_alloc_coherent(macb->rx_buffer_size * macb->rx_ring_size);
+	macb->rx_ring = dma_alloc_coherent(RX_RING_BYTES(macb));
+	macb->tx_ring = dma_alloc_coherent(TX_RING_BYTES);
+
+	edev->recv = macb_recv;
+
 	macb_reset_hw(macb);
 	ncfgr = macb_mdc_clk_div(macb);
 	ncfgr |= MACB_BIT(PAE);		/* PAuse Enable */
-- 
1.8.2.rc2




More information about the barebox mailing list