[PATCH 0/5] Zynq support for barebox

[Josh Cartwright]

In San Francisco a couple weeks ago (ELC2013), Thomas Petazzoni
informally mentioned barebox in passing, so I decided to toy with it a
bit...

This patchset adds basic support for the Zynq SoC to barebox.  So far,
it's only been tested as a 'secondary' bootloader (after u-boot).  Also
added is support for the zc702 development board.

The first two patches are simple typos I found getting acclimated to the
barebox source.

Josh Cartwright (5):
  trivial: doc: fix typos in mach-arm.dox
  defaultenv: fixed mismatched braces in bin/boot
  ARM: zynq: add driver for Zynq uarts
  ARM: zynq: add support for Zynq 7000 SoC
  ARM: zynq: add support for zc702 development board

 arch/arm/Kconfig                           |   9 +
 arch/arm/Makefile                          |   2 +
 arch/arm/boards/zynq-zc702/Makefile        |   1 +
 arch/arm/boards/zynq-zc702/config.h        |   0
 arch/arm/boards/zynq-zc702/devices.c       |  70 ++++++
 arch/arm/boards/zynq-zc702/lowlevel.c      |  28 +++
 arch/arm/mach-arm.dox                      |   4 +-
 arch/arm/mach-zynq/Kconfig                 |  22 ++
 arch/arm/mach-zynq/Makefile                |   1 +
 arch/arm/mach-zynq/clocks.c                | 341 +++++++++++++++++++++++++++++
 arch/arm/mach-zynq/include/mach/clkdev.h   |   7 +
 arch/arm/mach-zynq/include/mach/debug_ll.h |  21 ++
 arch/arm/mach-zynq/include/mach/slcr.h     |  26 +++
 arch/arm/mach-zynq/reset.c                 |  28 +++
 defaultenv/bin/boot                        |   2 +-
 drivers/serial/Kconfig                     |   6 +
 drivers/serial/Makefile                    |   1 +
 drivers/serial/serial_zynq.c               | 144 ++++++++++++
 18 files changed, 710 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/boards/zynq-zc702/Makefile
 create mode 100644 arch/arm/boards/zynq-zc702/config.h
 create mode 100644 arch/arm/boards/zynq-zc702/devices.c
 create mode 100644 arch/arm/boards/zynq-zc702/lowlevel.c
 create mode 100644 arch/arm/mach-zynq/Kconfig
 create mode 100644 arch/arm/mach-zynq/Makefile
 create mode 100644 arch/arm/mach-zynq/clocks.c
 create mode 100644 arch/arm/mach-zynq/include/mach/clkdev.h
 create mode 100644 arch/arm/mach-zynq/include/mach/debug_ll.h
 create mode 100644 arch/arm/mach-zynq/include/mach/slcr.h
 create mode 100644 arch/arm/mach-zynq/reset.c
 create mode 100644 drivers/serial/serial_zynq.c

-- 
1.8.1.2