[PATCH 08/14] atmel_mci: rwproof is only needed since IP version 0x200

[Jean-Christophe PLAGNIOL-VILLARD]

On 18:31 Fri 25 Jan     , Sascha Hauer wrote:
> On Fri, Jan 25, 2013 at 04:17:41PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> > ---
> >  drivers/mci/atmel_mci.c |   10 +++++++++-
> >  1 file changed, 9 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/mci/atmel_mci.c b/drivers/mci/atmel_mci.c
> > index d5fdd1d..bf0adb0 100644
> > --- a/drivers/mci/atmel_mci.c
> > +++ b/drivers/mci/atmel_mci.c
> > @@ -28,6 +28,7 @@
> >  #include "atmel-mci-regs.h"
> >  
> >  struct atmel_mci_caps {
> > +	bool    has_rwproof;
> >  	bool	has_odd_clk_div;
> >  };
> >  
> > @@ -94,7 +95,13 @@ static void atmci_set_clk_rate(struct atmel_mci *host,
> >  	dev_dbg(host->hw_dev, "atmel_set_clk_rate: clkIn=%ld clkIos=%d divider=%d\n",
> >  		host->bus_hz, clock_min, clkdiv);
> >  
> > -	host->mode_reg |= ATMCI_MR_RDPROOF | ATMCI_MR_WRPROOF;
> > +	/*
> > +	 * WRPROOF and RDPROOF prevent overruns/underruns by
> > +	 * stopping the clock when the FIFO is full/empty.
> > +	 * This state is not expected to last for long.
> > +	 */
> > +	if (host->caps.has_rwproof)
> > +		host->mode_reg |= ATMCI_MR_RDPROOF | ATMCI_MR_WRPROOF;
> >  
> >  	atmci_writel(host, ATMCI_MR, host->mode_reg);
> >  }
> > @@ -470,6 +477,7 @@ static void atmci_get_cap(struct atmel_mci *host)
> >  	case 0x400:
> >  	case 0x300:
> >  	case 0x200:
> > +		host->caps.has_rwproof = 1;
> >  	case 0x100:
> >  	case 0x0:
> 
> By 'since' in the subject do you mean 'up to'?
yeah to code is right no the subject

Best Regards,
J.
> 
> Sascha
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |