[PATCH 3/5] at91sam9g45: fix i2c typos

[Jean-Christophe PLAGNIOL-VILLARD]

arch/arm/mach-at91/at91sam9g45_devices.c: In function 'at91_add_device_i2c':
arch/arm/mach-at91/at91sam9g45_devices.c:158:42: error: 'pdata_i2c' undeclared (first use in this function)
arch/arm/mach-at91/at91sam9g45_devices.c:158:42: note: each undeclared identifier is reported only once for each function it appears in
arch/arm/mach-at91/at91sam9g45_devices.c:163:8: error: expected ':' or '...' before ';' token
arch/arm/mach-at91/at91sam9g45_devices.c:166:8: error: expected ':' or '...' before ';' token

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
 arch/arm/mach-at91/at91sam9g45_devices.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index c5f99b1..d2746da 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -155,15 +155,15 @@ static struct i2c_gpio_platform_data pdata_i2c1 = {
 
 void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
 {
-	struct i2c_gpio_platform_data *pdata = &pdata_i2c;
+	struct i2c_gpio_platform_data *pdata;
 
 	i2c_register_board_info(i2c_id, devices, nr_devices);
 
 	switch (i2c_id) {
-	case 0;
+	case 0:
 		pdata = &pdata_i2c0;
 		break;
-	case 1;
+	case 1:
 		pdata = &pdata_i2c1;
 		break;
 	default:
-- 
1.7.10.4