[PATCH 3/4] ARM: netx: Remove references for missing boards

[Alexander Shiyan]

Barebox do not have support for MACH_NXDKN, MACH_NXHMIBB,
MACH_NXEB500HMI and MACH_NXHX boards, so remove these symbols.

Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
---
 arch/arm/mach-netx/Kconfig | 16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig
index 8d8f49b..3c62d60 100644
--- a/arch/arm/mach-netx/Kconfig
+++ b/arch/arm/mach-netx/Kconfig
@@ -9,35 +9,19 @@ config BOARDINFO
 
 config NETX_SDRAM_CTRL
 	hex
-	default 0x010D0001 if MACH_NXDKN
 	default 0x010D0121 if MACH_NXDB500
-	default 0x030D0111 if MACH_NXHMIBB
-	default 0x010D0111 if MACH_NXEB500HMI
-	default 0x030D0001 if MACH_NXHX
 
 config NETX_SDRAM_TIMING_CTRL
 	hex
-	default 0x03C12151 if MACH_NXDKN
 	default 0x03C13261 if MACH_NXDB500
-	default 0x03C13251 if MACH_NXHMIBB
-	default 0x03C13251 if MACH_NXEB500HMI
-	default 0x03C23251 if MACH_NXHX
 
 config NETX_MEM_CTRL
 	hex
-	default 0x0103030F if MACH_NXDKN
 	default 0x0203030F if MACH_NXDB500
-	default 0x0103030F if MACH_NXHMIBB
-	default 0x0103030F if MACH_NXEB500HMI
-	default 0x0103030F if MACH_NXHX
 
 config NETX_COOKIE
 	hex
-	default 16 if MACH_NXDKN
 	default 32 if MACH_NXDB500
-	default 16 if MACH_NXHMIBB
-	default 16 if MACH_NXEB500HMI
-	default 16 if MACH_NXHX
 
 choice
 	prompt "Netx Board Type"
-- 
1.8.1.5