[PATCH] ARM: OMAP5 processors support

[Sascha Hauer]

On Thu, Apr 25, 2013 at 03:42:10PM +0300, Uladzimir Bely wrote:
> 
> I'm not too familiar with barebox's defaultenv/defaultenv-2. Our work on
> omap5 was based mostly on omap5 code from U-Boot and omap4 code from barebox.
> Mostly, I used pcm049 as an example of omap4-based board in barebox. So
> arch/arm/boards/omap5_sevm/env/config looks like this one, but includes
> only most necessary thinks to load to barebox prompt.
> 
> Please, give me a hint, which board can be used as an example of using
> defaultenv-2, maybe I'll do something.
>

See for example the i.MX53 loco (aka qsb) board:

arch/arm/boards/freescale-mx53-loco/env/

Sascha
 
-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |