[PATCH v2] nand_base: detect more ONFI flash

[Sascha Hauer]

On Wed, Apr 10, 2013 at 06:04:52PM +0200, Eric Bénard wrote:
> if the flash has a known type, the ONFI detection won't occur
> and thus we may not detect the right parameters.
> By testing both namd and pagesize, as done in the kernel, we
> can detect ONFI flash with know IDs.
> 
> As an example on an i.MX53 board :
> - without the patch :
> NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3
> (Micron NAND 1GiB 3,3V 8-bit), page size: 4096, OOB size: 128
> 
> - with the patch :
> ONFI flash detected ... ONFI param page 0 valid
> NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3
> (Micron MT29F8G08ABACAWP), page size: 4096, OOB size: 224
> 
> in the first case the OOB size is wrong.
> 
> Signed-off-by: Eric Bénard <eric at eukrea.com>

Applied, thanks

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |