[for master PATCH 2/2] calao: at91 qil/tny/usb auto detect the phy addr

[Jean-Christophe PLAGNIOL-VILLARD]

Hi Sacha,

	after applying the phylib we need this path on calao hw

Best Regards,
J.
On 17:48 Tue 14 Aug     , Jean-Christophe PLAGNIOL-VILLARD wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> ---
>  arch/arm/boards/qil-a9260/init.c |    2 +-
>  arch/arm/boards/tny-a926x/init.c |    2 +-
>  arch/arm/boards/usb-a926x/init.c |    2 +-
>  3 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boards/qil-a9260/init.c b/arch/arm/boards/qil-a9260/init.c
> index ee204fb..92aea97 100644
> --- a/arch/arm/boards/qil-a9260/init.c
> +++ b/arch/arm/boards/qil-a9260/init.c
> @@ -80,7 +80,7 @@ static void qil_a9260_add_device_mci(void) {}
>  #ifdef CONFIG_CALAO_MB_QIL_A9260
>  static struct at91_ether_platform_data macb_pdata = {
>  	.flags		= AT91SAM_ETHER_RMII,
> -	.phy_addr	= 0,
> +	.phy_addr	= -1,
>  };
>  
>  static void qil_a9260_phy_reset(void)
> diff --git a/arch/arm/boards/tny-a926x/init.c b/arch/arm/boards/tny-a926x/init.c
> index d58132a..556e633 100644
> --- a/arch/arm/boards/tny-a926x/init.c
> +++ b/arch/arm/boards/tny-a926x/init.c
> @@ -118,7 +118,7 @@ static void tny_a9260_add_device_nand(void)
>  #ifdef CONFIG_DRIVER_NET_MACB
>  static struct at91_ether_platform_data macb_pdata = {
>  	.flags		= AT91SAM_ETHER_RMII,
> -	.phy_addr	= 0,
> +	.phy_addr	= -1,
>  };
>  
>  static void __init ek_add_device_macb(void)
> diff --git a/arch/arm/boards/usb-a926x/init.c b/arch/arm/boards/usb-a926x/init.c
> index 52444e1..7b19fa4 100644
> --- a/arch/arm/boards/usb-a926x/init.c
> +++ b/arch/arm/boards/usb-a926x/init.c
> @@ -122,7 +122,7 @@ static void usb_a9260_add_device_nand(void) {}
>  #if defined(CONFIG_DRIVER_NET_MACB)
>  static struct at91_ether_platform_data macb_pdata = {
>  	.flags		= AT91SAM_ETHER_RMII,
> -	.phy_addr	= 0,
> +	.phy_addr	= -1,
>  };
>  
>  static void usb_a9260_phy_reset(void)
> -- 
> 1.7.10.4
>