[PATCH 0/4 v3] at91sam9x5ek: add spi and mci support

[Jean-Christophe PLAGNIOL-VILLARD]

ping
On 12:34 Sat 03 Nov     , Jean-Christophe PLAGNIOL-VILLARD wrote:
> HI,
> 	v3: rebase on the v3 of at91sam9xek i2c support
> 
> 	with this +1 patch serie the support of the at91sam9x5ek is mostly
> 	complete
> 
> 	This will add spi and mci0 support as spi0 and mci0 conflict
> 
> 	We are still missing framebuffer, usb host and device and hardware i2c support
> 	but this wil be added later
> 
> 	This patch serie depedsn on the at91sam9x5ek i2c and m25p80 patcheries
> 
> 	the correct version
> 
> 	this one work but brake the etherent as it mux the 4 cs as gpio and we
> 	use them on the eth0
> 
> The following changes since commit b3a0963d358e14180e9bbde68ab78fdebae071b7:
> 
>   m25p80: sync flash support with the kernel (2012-11-03 04:23:15 +0800)
> 
> are available in the git repository at:
> 
>   git://git.jcrosoft.org/barebox.git delivery/at91sam9x5ek_mci_spi
> 
> for you to fetch changes up to dc7e1ce2a4ca879d07ba5786cfaa84f54d2ee763:
> 
>   at91sam9x5ek: add mci support (2012-11-03 04:23:48 +0800)
> 
> ----------------------------------------------------------------
> Jean-Christophe PLAGNIOL-VILLARD (4):
>       at91sam9x5: add spi support
>       at91sam9x5ek: add spi support
>       at91sam9x5: add mci support
>       at91sam9x5ek: add mci support
> 
>  arch/arm/boards/at91sam9x5ek/init.c     |   57 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/configs/at91sam9x5ek_defconfig |   10 +++++++---
>  arch/arm/mach-at91/at91sam9x5.c         |    4 ++++
>  arch/arm/mach-at91/at91sam9x5_devices.c |  124 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 192 insertions(+), 3 deletions(-)
> 
> Best Regards,
> J.
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox