[PATCH v2 2/2] commands: remove old Y-Modem implementation

Robert Jarzmik robert.jarzmik at free.fr
Sun Nov 4 12:55:24 EST 2012


From: Robert Jarzmik <robert.jarzmik at intel.com>

As a new implementation of Y-Modem protocol is available,
switch from old implementation to the new one :
 - remove old xyzModem* files
 - remove old command loady2
 - rename command loady2 to loady

Signed-off-by: Robert Jarzmik <robert.jarzmik at intel.com>
---
 commands/Makefile   |    4 +-
 commands/loadb.c    |  102 +------
 commands/loads.c    |    1 -
 commands/loadxy.c   |    2 +-
 commands/xyzModem.c |  785 ---------------------------------------------------
 include/xyzModem.h  |  109 -------
 6 files changed, 12 insertions(+), 991 deletions(-)
 delete mode 100644 commands/xyzModem.c
 delete mode 100644 include/xyzModem.h

diff --git a/commands/Makefile b/commands/Makefile
index 44ad904..14c68dd 100644
--- a/commands/Makefile
+++ b/commands/Makefile
@@ -2,8 +2,8 @@ obj-$(CONFIG_STDDEV)		+= stddev.o
 obj-$(CONFIG_CMD_BOOTM)		+= bootm.o
 obj-$(CONFIG_CMD_UIMAGE)	+= uimage.o
 obj-$(CONFIG_CMD_LINUX16)	+= linux16.o
-obj-$(CONFIG_CMD_LOADB)		+= loadb.o xyzModem.o
-obj-$(CONFIG_CMD_LOADY)		+= loadb.o xyzModem.o loadxy.o
+obj-$(CONFIG_CMD_LOADB)		+= loadb.o
+obj-$(CONFIG_CMD_LOADY)		+= loadxy.o
 obj-$(CONFIG_CMD_LOADS)		+= loads.o
 obj-$(CONFIG_CMD_ECHO)		+= echo.o
 obj-$(CONFIG_CMD_MEMORY)	+= mem.o
diff --git a/commands/loadb.c b/commands/loadb.c
index 898b9e3..a2f3315 100644
--- a/commands/loadb.c
+++ b/commands/loadb.c
@@ -31,7 +31,6 @@
  */
 #include <common.h>
 #include <command.h>
-#include <xyzModem.h>
 #include <console.h>
 #include <errno.h>
 #include <environment.h>
@@ -59,8 +58,6 @@
 
 static int ofd;			/* output file descriptor */
 
-#ifdef CONFIG_CMD_LOADB
-
 /* Size of my buffer to write to o/p file */
 #define MAX_WRITE_BUFFER 4096	/* Write size to o/p file */
 static char *write_buffer;	/* buffer for finalized data to write */
@@ -593,66 +590,6 @@ err_quit:
 	return size;
 }
 
-#endif				/* CONFIG_CMD_LOADB */
-
-#ifdef CONFIG_CMD_LOADY
-/**
- * @brief getcxmodem
- *
- * @return if character avaiable, return the same, else return -1
- */
-static int getcxmodem(void)
-{
-	if (tstc())
-		return (getc());
-	return -1;
-}
-
-/**
- * @brief  LoadY over ymodem protocol
- *
- * @return download size
- */
-static ulong load_serial_ymodem(void)
-{
-	int size;
-	char buf[32];
-	int err;
-	int res, wr;
-	connection_info_t info;
-	char ymodemBuf[1024];
-	ulong addr = 0;
-
-	size = 0;
-	info.mode = xyzModem_ymodem;
-	res = xyzModem_stream_open(&info, &err);
-	if (!res) {
-		while ((res = xyzModem_stream_read(ymodemBuf, 1024, &err)) >
-				0) {
-			size += res;
-			addr += res;
-			wr = write(ofd, ymodemBuf, res);
-			if (res != wr) {
-				perror("ymodem");
-				break;
-			}
-
-		}
-	} else {
-		printf("%s\n", xyzModem_error(err));
-	}
-
-	xyzModem_stream_close(&err);
-	xyzModem_stream_terminate(false, &getcxmodem);
-
-	printf("## Total Size      = 0x%08x = %d Bytes\n", size, size);
-	sprintf(buf, "%X", size);
-	setenv("filesize", buf);
-
-	return res;
-}
-#endif
-
 /**
  * @brief returns current used console device
  *
@@ -754,27 +691,16 @@ static int do_load_serial_bin(int argc, char *argv[])
 				break;
 		}
 	}
-#ifdef CONFIG_CMD_LOADY
-	if (strcmp(argv[0], "loady") == 0) {
-		printf("## Ready for binary (ymodem) download "
-		       "to 0x%08lX offset on %s device at %d bps...\n", offset,
-		       output_file, load_baudrate);
-		addr = load_serial_ymodem();
-	}
-#endif
-#ifdef CONFIG_CMD_LOADB
-	if (strcmp(argv[0], "loadb") == 0) {
-
-		printf("## Ready for binary (kermit) download "
-		       "to 0x%08lX offset on %s device at %d bps...\n", offset,
-		       output_file, load_baudrate);
-		addr = load_serial_bin();
-		if (addr == 0) {
-			printf("## Binary (kermit) download aborted\n");
-			rcode = 1;
-		}
+
+	printf("## Ready for binary (kermit) download "
+	       "to 0x%08lX offset on %s device at %d bps...\n", offset,
+	       output_file, load_baudrate);
+	addr = load_serial_bin();
+	if (addr == 0) {
+		printf("## Binary (kermit) download aborted\n");
+		rcode = 1;
 	}
-#endif
+
 	if (load_baudrate != current_baudrate) {
 		printf("## Switch baudrate to %d bps and press ESC ...\n",
 		       current_baudrate);
@@ -799,18 +725,8 @@ static const __maybe_unused char cmd_loadb_help[] =
     "  -b baud   - baudrate at which to download - defaults to "
     "console baudrate\n"
     "  -c        - Create file if it is not present - default disabled";
-#ifdef CONFIG_CMD_LOADB
 BAREBOX_CMD_START(loadb)
 	.cmd = do_load_serial_bin,
 	.usage = "Load binary file over serial line (kermit mode)",
 	BAREBOX_CMD_HELP(cmd_loadb_help)
 BAREBOX_CMD_END
-#endif
-#ifdef CONFIG_CMD_LOADY
-BAREBOX_CMD_START(loady)
-	.cmd = do_load_serial_bin,
-	.usage = "Load binary file over serial line (ymodem mode)",
-	BAREBOX_CMD_HELP(cmd_loadb_help)
-BAREBOX_CMD_END
-#endif
-
diff --git a/commands/loads.c b/commands/loads.c
index 7f4c647..bfc465b 100644
--- a/commands/loads.c
+++ b/commands/loads.c
@@ -25,7 +25,6 @@
 #include <environment.h>
 #include <s_record.h>
 #include <net.h>
-#include <xyzModem.h>
 
 static ulong load_serial(ulong offset);
 static int read_record(char *buf, ulong len);
diff --git a/commands/loadxy.c b/commands/loadxy.c
index 141bd7b..8914655 100644
--- a/commands/loadxy.c
+++ b/commands/loadxy.c
@@ -230,7 +230,7 @@ static const __maybe_unused char cmd_loady_help[] =
 	"console baudrate\n";
 
 #ifdef CONFIG_CMD_LOADY
-BAREBOX_CMD_START(loady2)
+BAREBOX_CMD_START(loady)
 	.cmd = do_loady,
 	.usage = "Load binary file over serial line (Y-Modem or Y-Modem/G)",
 BAREBOX_CMD_HELP(cmd_loady_help)
diff --git a/commands/xyzModem.c b/commands/xyzModem.c
deleted file mode 100644
index 71d7d68..0000000
--- a/commands/xyzModem.c
+++ /dev/null
@@ -1,785 +0,0 @@
-/**
- * @file
- * @brief RedBoot stream handler for xyzModem protocol
- *
- * FileName: commands/xyzModem.c
- * Originally from u-boot xyzModem.c
- */
-/*
- * 2008 - Nishanth Menon <x0nishan at ti.com>
- * Modified for sparse and checkpatch.pl compliance
- */
-/*
- *==========================================================================
- *
- *      xyzModem.c
- *
- *      RedBoot stream handler for xyzModem protocol
- *
- *==========================================================================
- *####ECOSGPLCOPYRIGHTBEGIN####
- * -------------------------------------------
- * This file is part of eCos, the Embedded Configurable Operating System.
- * Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
- * Copyright (C) 2002 Gary Thomas
- *
- * eCos is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 or (at your option) any later version.
- *
- * eCos is distributed in the hope that it will be useful, but WITHOUT ANY
- * WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with eCos; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * As a special exception, if other files instantiate templates or use macros
- * or inline functions from this file, or you compile this file and link it
- * with other works to produce a work based on this file, this file does not
- * by itself cause the resulting work to be covered by the GNU General Public
- * License. However the source code for this file must still be made available
- * in accordance with section (3) of the GNU General Public License.
- *
- * This exception does not invalidate any other reasons why a work based on
- * this file might be covered by the GNU General Public License.
- *
- * Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
- * at http: *sources.redhat.com/ecos/ecos-license/
- * -------------------------------------------
- *####ECOSGPLCOPYRIGHTEND####
- *==========================================================================
- *#####DESCRIPTIONBEGIN####
- *
- * Author(s):    gthomas
- * Contributors: gthomas, tsmith, Yoshinori Sato
- * Date:         2000-07-14
- * Purpose:
- * Description:
- *
- * This code is part of RedBoot (tm).
- *
- *####DESCRIPTIONEND####
- *
- *==========================================================================
- */
-#include <common.h>
-#include <xyzModem.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <console.h>
-#include <crc.h>
-#include <linux/ctype.h>
-
-/* Assumption - run xyzModem protocol over the console port */
-
-/* Values magic to the protocol */
-#define SOH 0x01
-#define STX 0x02
-#define EOT 0x04
-#define ACK 0x06
-#define BSP 0x08
-#define NAK 0x15
-#define CAN 0x18
-#define EOF 0x1A		/* ^Z for DOS officionados */
-
-#define USE_YMODEM_LENGTH
-
-/* Data & state local to the protocol */
-static struct {
-#ifdef REDBOOT
-	hal_virtual_comm_table_t *__chan;
-#else
-	int *__chan;
-#endif
-	unsigned char pkt[1024], *bufp;
-	unsigned char blk, cblk, crc1, crc2;
-	unsigned char next_blk;	/* Expected block */
-	int len, mode, total_retries;
-	int total_SOH, total_STX, total_CAN;
-	bool crc_mode, at_eof, tx_ack;
-#ifdef USE_YMODEM_LENGTH
-	unsigned long file_length, read_length;
-#endif
-} xyz;
-
-#define xyzModem_CHAR_TIMEOUT            2000	/* 2 seconds */
-#define xyzModem_MAX_RETRIES             20
-#define xyzModem_MAX_RETRIES_WITH_CRC    10
-/* Wait for 3 CAN before quitting */
-#define xyzModem_CAN_COUNT                3
-
-#ifndef REDBOOT			/*SB */
-typedef int cyg_int32;
-static int CYGACC_COMM_IF_GETC_TIMEOUT(char chan, char *c)
-{
-#define DELAY 20
-	unsigned long counter = 0;
-	while (!tstc() && (counter < xyzModem_CHAR_TIMEOUT * 1000 / DELAY)) {
-		udelay(DELAY);
-		counter++;
-	}
-	if (tstc()) {
-		*c = getc();
-		return 1;
-	}
-	return 0;
-}
-
-static void CYGACC_COMM_IF_PUTC(char x, char y)
-{
-	console_putc(CONSOLE_STDOUT, y);
-}
-
-/* Validate a hex character */
-static inline bool _is_hex(char c)
-{
-	return (((c >= '0') && (c <= '9')) ||
-		((c >= 'A') && (c <= 'F')) || ((c >= 'a') && (c <= 'f')));
-}
-
-/* Convert a single hex nibble */
-static inline int _from_hex(char c)
-{
-	int ret = 0;
-
-	if ((c >= '0') && (c <= '9'))
-		ret = (c - '0');
-	else if ((c >= 'a') && (c <= 'f'))
-		ret = (c - 'a' + 0x0a);
-	else if ((c >= 'A') && (c <= 'F'))
-		ret = (c - 'A' + 0x0A);
-
-	return ret;
-}
-
-/* Parse (scan) a number */
-static bool parse_num(char *s, unsigned long *val, char **es, char *delim)
-{
-	bool first = true;
-	int radix = 10;
-	char c;
-	unsigned long result = 0;
-	int digit = 0;
-
-	while (*s == ' ')
-		s++;
-	while (*s) {
-		if (first && (s[0] == '0') && (tolower(s[1]) == 'x')) {
-			radix = 16;
-			s += 2;
-		}
-		first = false;
-		c = *s++;
-		if (_is_hex(c))
-			digit = _from_hex(c);
-		if (_is_hex(c) && (digit < radix)) {
-			/* Valid digit */
-#ifdef CYGPKG_HAL_MIPS
-			/* FIXME: tx49 compiler generates 0x2539018 for
-			 * MUL which isn't any good. */
-			if (16 == radix)
-				result = result << 4;
-			else
-				result = 10 * result;
-			result += digit;
-#else
-			result = (result * radix) + digit;
-#endif
-		} else {
-			if (delim != (char *)0) {
-				/* See if this character is one of the
-				 * delimiters */
-				char *dp = delim;
-				while (*dp && (c != *dp))
-					dp++;
-				if (*dp)
-					break;	/* Found a good delimiter */
-			}
-			return false;	/* Malformatted number */
-		}
-	}
-	*val = result;
-	if (es != (char **)0)
-		*es = s;
-	return true;
-}
-
-#endif
-
-#define USE_SPRINTF
-#ifdef DEBUG
-#ifndef USE_SPRINTF
-/*
- * Note: this debug setup only works if the target platform has two serial ports
- * available so that the other one (currently only port 1) can be used for debug
- * messages.
- */
-static int zm_dprintf(char *fmt, ...)
-{
-	int cur_console;
-	va_list args;
-
-	va_start(args, fmt);
-#ifdef REDBOOT
-	cur_console =
-	    CYGACC_CALL_IF_SET_CONSOLE_COMM
-	    (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
-	CYGACC_CALL_IF_SET_CONSOLE_COMM(1);
-#endif
-	diag_vprintf(fmt, args);
-#ifdef REDBOOT
-	CYGACC_CALL_IF_SET_CONSOLE_COMM(cur_console);
-#endif
-}
-
-static void zm_flush(void)
-{
-}
-
-#else
-/*
- * Note: this debug setup works by storing the strings in a fixed buffer
- */
-#define FINAL
-#ifdef FINAL
-static char *zm_out = (char *)0x00380000;
-static char *zm_out_start = (char *)0x00380000;
-#else
-static char zm_buf[8192];
-static char *zm_out = zm_buf;
-static char *zm_out_start = zm_buf;
-
-#endif
-static int zm_dprintf(char *fmt, ...)
-{
-	int len;
-	va_list args;
-
-	va_start(args, fmt);
-	len = diag_vsprintf(zm_out, fmt, args);
-	zm_out += len;
-	return len;
-}
-
-static void zm_flush(void)
-{
-#ifdef REDBOOT
-	char *p = zm_out_start;
-	while (*p)
-		mon_write_char(*p++);
-#endif
-	zm_out = zm_out_start;
-}
-#endif
-
-static void zm_dump_buf(void *buf, int len)
-{
-#ifdef REDBOOT
-	diag_vdump_buf_with_offset(zm_dprintf, buf, len, 0);
-#else
-
-#endif
-}
-
-static unsigned char zm_buf[2048];
-static unsigned char *zm_bp;
-
-static void zm_new(void)
-{
-	zm_bp = zm_buf;
-}
-
-static void zm_save(unsigned char c)
-{
-	*zm_bp++ = c;
-}
-
-static void zm_dump(int line)
-{
-	zm_dprintf("Packet at line: %d\n", line);
-	zm_dump_buf(zm_buf, zm_bp - zm_buf);
-}
-
-#define ZM_DEBUG(x) x
-#else
-#define ZM_DEBUG(x)
-#endif
-
-/* Wait for the line to go idle */
-static void xyzModem_flush(void)
-{
-	int res;
-	char c;
-	while (true) {
-		res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
-		if (!res)
-			return;
-	}
-}
-
-static int xyzModem_get_hdr(void)
-{
-	char c;
-	int res;
-	bool hdr_found = false;
-	int i, can_total, hdr_chars;
-	unsigned short cksum;
-
-	ZM_DEBUG(zm_new());
-	/* Find the start of a header */
-	can_total = 0;
-	hdr_chars = 0;
-
-	if (xyz.tx_ack) {
-		CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
-		xyz.tx_ack = false;
-	}
-	while (!hdr_found) {
-		res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
-		ZM_DEBUG(zm_save(c));
-		if (res) {
-			hdr_chars++;
-			switch (c) {
-			case SOH:
-				xyz.total_SOH++;
-			case STX:
-				if (c == STX)
-					xyz.total_STX++;
-				hdr_found = true;
-				break;
-			case CAN:
-				xyz.total_CAN++;
-				ZM_DEBUG(zm_dump(__LINE__));
-				if (++can_total == xyzModem_CAN_COUNT) {
-					return xyzModem_cancel;
-				} else {
-					/* Wait for multiple CAN to avoid
-					 * early quits */
-					break;
-				}
-			case EOT:
-				/* EOT only supported if no noise */
-				if (hdr_chars == 1) {
-					CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
-					ZM_DEBUG(zm_dprintf
-						 ("ACK on EOT #%d\n",
-						  __LINE__));
-					ZM_DEBUG(zm_dump(__LINE__));
-					return xyzModem_eof;
-				}
-			default:
-				/* Ignore, waiting for start of header */
-				;
-			}
-		} else {
-			/* Data stream timed out */
-			xyzModem_flush();	/* Toss any current input */
-			ZM_DEBUG(zm_dump(__LINE__));
-			CYGACC_CALL_IF_DELAY_US((cyg_int32) 250000);
-			return xyzModem_timeout;
-		}
-	}
-
-	/* Header found, now read the data */
-	res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.blk);
-	ZM_DEBUG(zm_save(xyz.blk));
-	if (!res) {
-		ZM_DEBUG(zm_dump(__LINE__));
-		return xyzModem_timeout;
-	}
-	res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.cblk);
-	ZM_DEBUG(zm_save(xyz.cblk));
-	if (!res) {
-		ZM_DEBUG(zm_dump(__LINE__));
-		return xyzModem_timeout;
-	}
-	xyz.len = (c == SOH) ? 128 : 1024;
-	xyz.bufp = xyz.pkt;
-	for (i = 0; i < xyz.len; i++) {
-		res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
-		ZM_DEBUG(zm_save(c));
-		if (res) {
-			xyz.pkt[i] = c;
-		} else {
-			ZM_DEBUG(zm_dump(__LINE__));
-			return xyzModem_timeout;
-		}
-	}
-	res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.crc1);
-	ZM_DEBUG(zm_save(xyz.crc1));
-	if (!res) {
-		ZM_DEBUG(zm_dump(__LINE__));
-		return xyzModem_timeout;
-	}
-	if (xyz.crc_mode) {
-		res =
-		    CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.crc2);
-		ZM_DEBUG(zm_save(xyz.crc2));
-		if (!res) {
-			ZM_DEBUG(zm_dump(__LINE__));
-			return xyzModem_timeout;
-		}
-	}
-	ZM_DEBUG(zm_dump(__LINE__));
-	/* Validate the message */
-	if ((xyz.blk ^ xyz.cblk) != (unsigned char)0xFF) {
-		ZM_DEBUG(zm_dprintf
-			 ("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk,
-			  (xyz.blk ^ xyz.cblk)));
-		ZM_DEBUG(zm_dump_buf(xyz.pkt, xyz.len));
-		xyzModem_flush();
-		return xyzModem_frame;
-	}
-	/* Verify checksum/CRC */
-	if (xyz.crc_mode) {
-		cksum = cyg_crc16(xyz.pkt, xyz.len);
-		if (cksum != ((xyz.crc1 << 8) | xyz.crc2)) {
-			ZM_DEBUG(zm_dprintf
-				 ("CRC error - recvd: %02x%02x, computed: %x\n",
-				  xyz.crc1, xyz.crc2, cksum & 0xFFFF));
-			return xyzModem_cksum;
-		}
-	} else {
-		cksum = 0;
-		for (i = 0; i < xyz.len; i++)
-			cksum += xyz.pkt[i];
-		if (xyz.crc1 != (cksum & 0xFF)) {
-			ZM_DEBUG(zm_dprintf
-				 ("Checksum error - recvd: %x, computed: %x\n",
-				  xyz.crc1, cksum & 0xFF));
-			return xyzModem_cksum;
-		}
-	}
-	/* If we get here, the message passes [structural] muster */
-	return 0;
-}
-
-int xyzModem_stream_open(connection_info_t *info, int *err)
-{
-#ifdef REDBOOT
-	int console_chan;
-#endif
-	int stat = 0;
-	int retries = xyzModem_MAX_RETRIES;
-	int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC;
-
-/*    ZM_DEBUG(zm_out = zm_out_start); */
-#ifdef xyzModem_zmodem
-	if (info->mode == xyzModem_zmodem) {
-		*err = xyzModem_noZmodem;
-		return -1;
-	}
-#endif
-
-#ifdef REDBOOT
-	/* Set up the I/O channel.  Note: this allows for using a different
-	 * port in the future */
-	console_chan =
-	    CYGACC_CALL_IF_SET_CONSOLE_COMM
-	    (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
-	if (info->chan >= 0)
-		CYGACC_CALL_IF_SET_CONSOLE_COMM(info->chan);
-	else
-		CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
-
-	xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS();
-
-	CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
-	CYGACC_COMM_IF_CONTROL(*xyz.__chan, __COMMCTL_SET_TIMEOUT,
-			       xyzModem_CHAR_TIMEOUT);
-#else
-/* TODO: CHECK ! */
-	int dummy = 0;
-	xyz.__chan = &dummy;
-#endif
-	xyz.len = 0;
-	xyz.crc_mode = true;
-	xyz.at_eof = false;
-	xyz.tx_ack = false;
-	xyz.mode = info->mode;
-	xyz.total_retries = 0;
-	xyz.total_SOH = 0;
-	xyz.total_STX = 0;
-	xyz.total_CAN = 0;
-#ifdef USE_YMODEM_LENGTH
-	xyz.read_length = 0;
-	xyz.file_length = 0;
-#endif
-
-	CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
-
-	if (xyz.mode == xyzModem_xmodem) {
-		/* X-modem doesn't have an information header - exit here */
-		xyz.next_blk = 1;
-		return 0;
-	}
-
-	while (retries-- > 0) {
-		stat = xyzModem_get_hdr();
-		if (stat == 0) {
-			/* Y-modem file information header */
-			if (xyz.blk == 0) {
-#ifdef USE_YMODEM_LENGTH
-				/* skip filename */
-				while (*xyz.bufp++) ;
-				/* get the length */
-				parse_num((char *)xyz.bufp, &xyz.file_length,
-					  NULL, " ");
-#endif
-				/* The rest of the file name data block
-				 * quietly discarded
-				 */
-				xyz.tx_ack = true;
-			}
-			xyz.next_blk = 1;
-			xyz.len = 0;
-			return 0;
-		} else if (stat == xyzModem_timeout) {
-			if (--crc_retries <= 0)
-				xyz.crc_mode = false;
-			/* Extra delay for startup */
-			CYGACC_CALL_IF_DELAY_US(5 * 100000);
-			CYGACC_COMM_IF_PUTC(*xyz.__chan,
-					    (xyz.crc_mode ? 'C' : NAK));
-			xyz.total_retries++;
-			ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
-		}
-		if (stat == xyzModem_cancel)
-			break;
-	}
-	*err = stat;
-	ZM_DEBUG(zm_flush());
-	return -1;
-}
-
-int xyzModem_stream_read(char *buf, int size, int *err)
-{
-	int stat, total, len;
-	int retries;
-
-	total = 0;
-	stat = xyzModem_cancel;
-	/* Try and get 'size' bytes into the buffer */
-	while (!xyz.at_eof && (size > 0)) {
-		if (xyz.len == 0) {
-			retries = xyzModem_MAX_RETRIES;
-			while (retries-- > 0) {
-				stat = xyzModem_get_hdr();
-				if (stat == 0) {
-					if (xyz.blk == xyz.next_blk) {
-						xyz.tx_ack = true;
-						ZM_DEBUG(zm_dprintf
-							 ("ACK block %d (%d)\n",
-							  xyz.blk, __LINE__));
-						xyz.next_blk =
-						    (xyz.next_blk + 1) & 0xFF;
-
-#if defined(xyzModem_zmodem) || defined(USE_YMODEM_LENGTH)
-						if (xyz.mode == xyzModem_xmodem
-						    || xyz.file_length == 0) {
-#else
-						if (1) {
-#endif
-			/* WARNING - Leaving formatting aside for code
-			 * clarity */
-			/* Data blocks can be padded with ^Z (EOF) characters */
-			/* This code tries to detect and remove them */
-			if ((xyz.bufp[xyz.len - 1] == EOF)
-			    && (xyz.bufp[xyz.len - 2] == EOF)
-			    && (xyz.bufp[xyz.len - 3] == EOF)) {
-				while (xyz.len &&
-					(xyz.bufp[xyz.len - 1] == EOF))
-						xyz.len--;
-				}
-			}
-#ifdef USE_YMODEM_LENGTH
-			/* WARNING - Leaving formatting aside for code
-			 * clarity */
-			/*
-			 * See if accumulated length exceeds that of the file.
-			 * If so, reduce size (i.e., cut out pad bytes)
-			 * Only do this for Y-modem (and Z-modem should it ever
-			 * be supported since it can fall back to Y-modem mode).
-			 */
-			if (xyz.mode != xyzModem_xmodem
-			    && 0 != xyz.file_length) {
-				xyz.read_length += xyz.len;
-				if (xyz.read_length > xyz.file_length)
-					xyz.len -= (xyz.read_length -
-					     xyz.file_length);
-			}
-#endif
-						break;
-					} else if (xyz.blk ==
-						   ((xyz.next_blk - 1) &
-						    0xFF)) {
-						/* Just re-ACK this so sender
-						 * will get on with it */
-						CYGACC_COMM_IF_PUTC(*xyz.__chan,
-								    ACK);
-						/* Need new header */
-						continue;
-					} else
-						stat = xyzModem_sequence;
-				}
-				if (stat == xyzModem_cancel)
-					break;
-				if (stat == xyzModem_eof) {
-					CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
-					ZM_DEBUG(zm_dprintf
-						 ("ACK (%d)\n", __LINE__));
-					if (xyz.mode == xyzModem_ymodem) {
-						CYGACC_COMM_IF_PUTC(*xyz.__chan,
-								    (xyz.
-								     crc_mode ?
-								     'C' :
-								     NAK));
-						xyz.total_retries++;
-						ZM_DEBUG(zm_dprintf
-						 ("Reading Final Header\n"));
-						stat = xyzModem_get_hdr();
-						CYGACC_COMM_IF_PUTC(*xyz.__chan,
-								    ACK);
-						ZM_DEBUG(zm_dprintf
-							 ("FINAL ACK (%d)\n",
-							  __LINE__));
-					}
-					xyz.at_eof = true;
-					break;
-				}
-				CYGACC_COMM_IF_PUTC(*xyz.__chan,
-						    (xyz.crc_mode ? 'C' : NAK));
-				xyz.total_retries++;
-				ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
-			}
-			if (stat < 0) {
-				*err = stat;
-				xyz.len = -1;
-				return total;
-			}
-		}
-		/* Don't "read" data from the EOF protocol package */
-		if (!xyz.at_eof) {
-			len = xyz.len;
-			if (size < len)
-				len = size;
-			memcpy(buf, xyz.bufp, len);
-			size -= len;
-			buf += len;
-			total += len;
-			xyz.len -= len;
-			xyz.bufp += len;
-		}
-	}
-	return total;
-}
-
-void xyzModem_stream_close(int *err)
-{
-	diag_printf
-	    ("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets,"
-	     " %d retries\n",
-	     xyz.crc_mode ? "CRC" : "Cksum", xyz.total_SOH, xyz.total_STX,
-	     xyz.total_CAN, xyz.total_retries);
-	ZM_DEBUG(zm_flush());
-}
-
-/* Need to be able to clean out the input buffer, so have to take the */
-/* getc */
-void xyzModem_stream_terminate(bool abort, int (*getc) (void))
-{
-	int c;
-
-	if (abort) {
-		ZM_DEBUG(zm_dprintf("!!!! TRANSFER ABORT !!!!\n"));
-		switch (xyz.mode) {
-		case xyzModem_xmodem:
-		case xyzModem_ymodem:
-			/* The X/YMODEM Spec seems to suggest that multiple CAN
-			 * followed by an equal number of Backspaces is a
-			 * friendly way to get the other end to abort. */
-			CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN);
-			CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN);
-			CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN);
-			CYGACC_COMM_IF_PUTC(*xyz.__chan, CAN);
-			CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP);
-			CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP);
-			CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP);
-			CYGACC_COMM_IF_PUTC(*xyz.__chan, BSP);
-			/* Now consume the rest of what's waiting on the line.*/
-			ZM_DEBUG(zm_dprintf("Flushing serial line.\n"));
-			xyzModem_flush();
-			xyz.at_eof = true;
-			break;
-#ifdef xyzModem_zmodem
-		case xyzModem_zmodem:
-			/* Might support it some day I suppose. */
-#endif
-			break;
-		}
-	} else {
-		ZM_DEBUG(zm_dprintf("Engaging cleanup mode...\n"));
-		/*
-		 * Consume any trailing crap left in the inbuffer from
-		 * previous recieved blocks. Since very few files are an
-		 * exact multiple of the transfer block size, there will
-		 * almost always be some gunk here.
-		 * If we don't eat it now, RedBoot will think the user typed it.
-		 */
-		ZM_DEBUG(zm_dprintf("Trailing gunk:\n"));
-		while ((c = (*getc) ()) > -1) ;
-		ZM_DEBUG(zm_dprintf("\n"));
-		/*
-		 * Make a small delay to give terminal programs like minicom
-		 * time to get control again after their file transfer program
-		 * exits.
-		 */
-		CYGACC_CALL_IF_DELAY_US((cyg_int32) 250000);
-	}
-}
-
-char *xyzModem_error(int err)
-{
-	switch (err) {
-	case xyzModem_access:
-		return "Can't access file";
-		break;
-	case xyzModem_noZmodem:
-		return "Sorry, zModem not available yet";
-		break;
-	case xyzModem_timeout:
-		return "Timed out";
-		break;
-	case xyzModem_eof:
-		return "End of file";
-		break;
-	case xyzModem_cancel:
-		return "Cancelled";
-		break;
-	case xyzModem_frame:
-		return "Invalid framing";
-		break;
-	case xyzModem_cksum:
-		return "CRC/checksum error";
-		break;
-	case xyzModem_sequence:
-		return "Block sequence error";
-		break;
-	default:
-		return "Unknown error";
-		break;
-	}
-}
-
-/*
- * RedBoot interface
- */
-#if 0				/* SB */
-GETC_IO_FUNCS(xyzModem_io, xyzModem_stream_open, xyzModem_stream_close,
-	      xyzModem_stream_terminate, xyzModem_stream_read, xyzModem_error);
-RedBoot_load(xmodem, xyzModem_io, false, false, xyzModem_xmodem);
-RedBoot_load(ymodem, xyzModem_io, false, false, xyzModem_ymodem);
-#endif
diff --git a/include/xyzModem.h b/include/xyzModem.h
deleted file mode 100644
index a3ea768..0000000
--- a/include/xyzModem.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- *==========================================================================
- *
- *      xyzModem.h
- *
- *      RedBoot stream handler for xyzModem protocol
- *
- *==========================================================================
- *####ECOSGPLCOPYRIGHTBEGIN####
- * -------------------------------------------
- * This file is part of eCos, the Embedded Configurable Operating System.
- * Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
- * Copyright (C) 2002 Gary Thomas
- *
- * eCos is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 or (at your option) any later version.
- *
- * eCos is distributed in the hope that it will be useful, but WITHOUT ANY
- * WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with eCos; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * As a special exception, if other files instantiate templates or use macros
- * or inline functions from this file, or you compile this file and link it
- * with other works to produce a work based on this file, this file does not
- * by itself cause the resulting work to be covered by the GNU General Public
- * License. However the source code for this file must still be made available
- * in accordance with section (3) of the GNU General Public License.
- *
- * This exception does not invalidate any other reasons why a work based on
- * this file might be covered by the GNU General Public License.
- *
- * Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
- * at http: *sources.redhat.com/ecos/ecos-license/
- * -------------------------------------------
- *####ECOSGPLCOPYRIGHTEND####
- *==========================================================================
- *#####DESCRIPTIONBEGIN####
- *
- * Author(s):    gthomas
- * Contributors: gthomas
- * Date:         2000-07-14
- * Purpose:
- * Description:
- *
- * This code is part of RedBoot (tm).
- *
- *####DESCRIPTIONEND####
- *
- *==========================================================================
- */
-
-#ifndef _XYZMODEM_H_
-#define _XYZMODEM_H_
-
-#define xyzModem_xmodem 1
-#define xyzModem_ymodem 2
-/* Don't define this until the protocol support is in place */
-/*#define xyzModem_zmodem 3 */
-
-#define xyzModem_access   -1
-#define xyzModem_noZmodem -2
-#define xyzModem_timeout  -3
-#define xyzModem_eof      -4
-#define xyzModem_cancel   -5
-#define xyzModem_frame    -6
-#define xyzModem_cksum    -7
-#define xyzModem_sequence -8
-
-#define xyzModem_close 1
-#define xyzModem_abort 2
-
-
-#ifdef REDBOOT
-extern getc_io_funcs_t xyzModem_io;
-#else
-#define CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT
-#define CYGACC_CALL_IF_SET_CONSOLE_COMM(x)
-
-#define diag_vprintf vprintf
-#define diag_printf printf
-#define diag_vsprintf vsprintf
-
-#define CYGACC_CALL_IF_DELAY_US(x) udelay(x)
-
-typedef struct {
-    char *filename;
-    int   mode;
-    int   chan;
-#ifdef CYGPKG_REDBOOT_NETWORKING
-    struct sockaddr_in *server;
-#endif
-} connection_info_t;
-
-#endif
-
-
-int   xyzModem_stream_open(connection_info_t *info, int *err);
-void  xyzModem_stream_close(int *err);
-void  xyzModem_stream_terminate(bool method, int (*getc)(void));
-int   xyzModem_stream_read(char *buf, int size, int *err);
-char *xyzModem_error(int err);
-
-#endif /* _XYZMODEM_H_ */
-- 
1.7.10




More information about the barebox mailing list