[PATCH 4/6] at91: set ip mode to dhcp-barebox

[Jean-Christophe PLAGNIOL-VILLARD]

As the mainline kernel does not enable the bootp support by default

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
 arch/arm/boards/at91rm9200ek/env/config     |    2 +-
 arch/arm/boards/at91sam9260ek/env/config    |    2 +-
 arch/arm/boards/at91sam9261ek/env/config    |    2 +-
 arch/arm/boards/at91sam9263ek/env/config    |    2 +-
 arch/arm/boards/at91sam9m10g45ek/env/config |    2 +-
 arch/arm/boards/tny-a926x/env/config        |    2 +-
 arch/arm/boards/usb-a926x/env/config        |    2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boards/at91rm9200ek/env/config b/arch/arm/boards/at91rm9200ek/env/config
index 12655c2..d1d9e8e 100644
--- a/arch/arm/boards/at91rm9200ek/env/config
+++ b/arch/arm/boards/at91rm9200ek/env/config
@@ -2,7 +2,7 @@
 
 # use 'dhcp' to do dhcp in barebox and in kernel
 # use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
+ip=dhcp-barebox
 
 # or set your networking parameters here
 #eth0.ipaddr=a.b.c.d
diff --git a/arch/arm/boards/at91sam9260ek/env/config b/arch/arm/boards/at91sam9260ek/env/config
index 74e793c..2c0f075 100644
--- a/arch/arm/boards/at91sam9260ek/env/config
+++ b/arch/arm/boards/at91sam9260ek/env/config
@@ -2,7 +2,7 @@
 
 # use 'dhcp' to do dhcp in barebox and in kernel
 # use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
+ip=dhcp-barebox
 
 if [ x$armlinux_architecture = x1099 ]
 then
diff --git a/arch/arm/boards/at91sam9261ek/env/config b/arch/arm/boards/at91sam9261ek/env/config
index fca5184..be4d37c 100644
--- a/arch/arm/boards/at91sam9261ek/env/config
+++ b/arch/arm/boards/at91sam9261ek/env/config
@@ -2,7 +2,7 @@
 
 # use 'dhcp' to do dhcp in barebox and in kernel
 # use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
+ip=dhcp-barebox
 
 if [ x$armlinux_architecture = x848 ]
 then
diff --git a/arch/arm/boards/at91sam9263ek/env/config b/arch/arm/boards/at91sam9263ek/env/config
index 95eb8af..93eeb1e 100644
--- a/arch/arm/boards/at91sam9263ek/env/config
+++ b/arch/arm/boards/at91sam9263ek/env/config
@@ -2,7 +2,7 @@
 
 # use 'dhcp' to do dhcp in barebox and in kernel
 # use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
+ip=dhcp-barebox
 dhcp_vendor_id=barebox-at91sam9263ek
 
 # or set your networking parameters here
diff --git a/arch/arm/boards/at91sam9m10g45ek/env/config b/arch/arm/boards/at91sam9m10g45ek/env/config
index 6b96599..d115132 100644
--- a/arch/arm/boards/at91sam9m10g45ek/env/config
+++ b/arch/arm/boards/at91sam9m10g45ek/env/config
@@ -2,7 +2,7 @@
 
 # use 'dhcp' to do dhcp in barebox and in kernel
 # use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
+ip=dhcp-barebox
 dhcp_vendor_id=barebox-at91sam9m10g45ek
 
 # or set your networking parameters here
diff --git a/arch/arm/boards/tny-a926x/env/config b/arch/arm/boards/tny-a926x/env/config
index 0ca38d5..b5215dc 100644
--- a/arch/arm/boards/tny-a926x/env/config
+++ b/arch/arm/boards/tny-a926x/env/config
@@ -2,7 +2,7 @@
 
 # use 'dhcp' to do dhcp in barebox and in kernel
 # use 'none' if you want to skip kernel ip autoconfiguration
-ip=none
+ip=dhcp-barebox
 
 # or set your networking parameters here
 #eth0.ipaddr=a.b.c.d
diff --git a/arch/arm/boards/usb-a926x/env/config b/arch/arm/boards/usb-a926x/env/config
index ff097a0..1f72803 100644
--- a/arch/arm/boards/usb-a926x/env/config
+++ b/arch/arm/boards/usb-a926x/env/config
@@ -2,7 +2,7 @@
 
 # use 'dhcp' to do dhcp in barebox and in kernel
 # use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
+ip=dhcp-barebox
 dhcp_vendor_id=barebox-at91sam9x5ek
 
 # or set your networking parameters here
-- 
1.7.9.1