Antwort: Re: Re: Create NAND Partition through barebox

christian.buettner at rafi.de christian.buettner at rafi.de
Thu Mar 29 08:59:07 EDT 2012


devinfo 
devices:
`---- imx_serial0
     `---- cs0
`---- mem0
     `---- 0x00000000-0x1fffffff: /dev/ram0
`---- mem1
     `---- 0x00000000-0x1fffffff: /dev/ram1
`---- imx_iim0
     `---- 0x00000000-0x0000001f: /dev/imx_iim_bank0
     `---- 0x00000000-0x0000001f: /dev/imx_iim_bank1
     `---- 0x00000000-0x0000001f: /dev/imx_iim_bank2
     `---- 0x00000000-0x0000001f: /dev/imx_iim_bank3
     `---- 0x00000000-0x0000001f: /dev/imx_iim_bank4
     `---- 0x00000000-0x0000001f: /dev/imx_iim_bank5
     `---- 0x00000000-0x0000001f: /dev/imx_iim_bank6
     `---- 0x00000000-0x0000001f: /dev/imx_iim_bank7
`---- ramfs0
`---- devfs0
`---- mem2
     `---- 0x00000000-0x00001d47: /dev/defaultenv
`---- mem3
     `---- 0x00000000-0xfffffffe: /dev/mem
`---- cs1
`---- fec_imx0
     `---- miidev0
          `---- 0x00000000-0x0000003f: /dev/phy0
     `---- eth0

drivers:
imx_serial
     ramfs
     devfs
   imx_iim
   fec_imx
    miidev
       mem
barebox:/ adp
Unknown command 'adp' - try 'help'
barebox:/ addpart 
Usage: addpart <device> <part_desc>
Add a partition description to a device.
<device>        device being worked on
<part_desc>     size1[@offset1](name1)[ro],size2[@offset2](name2)[ro],...

barebox:/ addpart /dev/nand0 
256k(barebox)ro,768k(bareboxenv),4M(kernel),-(root)
addpart: No such file or directory
barebox:/ 

I have an addpart tool as you can see but i cannot create a partition. In 
the /dev folder is also no /dev/nand0

- - Christian



Von:    Alexander Aring <alex.aring at googlemail.com>
An:     christian.buettner at rafi.de
Kopie:  Eric Bénard <eric at eukrea.com>, barebox at lists.infradead.org
Datum:  29.03.2012 14:40
Betreff:        Re: Re: Create NAND Partition through barebox




Hi,

is there a /dev/nand0 device?

/env/bin/init call "addpart /dev/nand0 $nand_parts" and create these 
partitions.
Or maybe the command is not available?

Alex

Am 29. März 2012 14:32 schrieb <christian.buettner at rafi.de>:
This is my current config: 

#!/bin/sh 

machine=test 

kernel_loc=nand 
rootfs_loc=nand 

rootfs_type=ubifs 

kernel=zImage 
rootfs=rootfs 
envimage=environ.bin 

autoboot_timeout=3 

nfsroot="/tools/rootfs/test" 

console="console=ttymxc0,115200" 

bootargs=${console} 

nand_parts="256k(barebox)ro,768k(bareboxenv),4M(kernel),-(root)" 
kdev="/dev/nand0.kernel.bb" 
rootfs_mtdblock_nand=3 



But i see no NAND in devinfo 

- - Christian 



Von:        Eric Bénard <eric at eukrea.com> 
An:        barebox at lists.infradead.org 
Datum:        29.03.2012 14:04 
Betreff:        Re: Create NAND Partition through barebox 
Gesendet von:        barebox-bounces at lists.infradead.org 




Hi,

Le Thu, 29 Mar 2012 13:55:43 +0200,
christian.buettner at rafi.de a écrit :
> i need to create a NAND Partition through the barebox prompt to be able 
to 
> flash a kernel image on it.
> 
>.../...
> 
> I tried using
> $ nand -a /dev/nand0.*
> 
> Nothing happens..
> What is wrong?
> 
do you have the partition definition in your /env/config file ?

Eric

_______________________________________________
barebox mailing list
barebox at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


_______________________________________________
barebox mailing list
barebox at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/barebox/attachments/20120329/5082c91c/attachment-0001.html>


More information about the barebox mailing list