[PATCH 05/14] at91sam9263ek: update defconfig

[Jean-Christophe PLAGNIOL-VILLARD]

 - set max size to 256KiB
 - enable MMU
 - bootm: enable oftree and initrd support
 - nand: drop non used hw ecc

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
 arch/arm/configs/at91sam9263ek_defconfig |   17 +++++++++++++++--
 1 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index 3353601..f59eab9 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -1,5 +1,9 @@
 CONFIG_ARCH_AT91SAM9263=y
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_MMU=y
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x40000
+CONFIG_EXPERIMENTAL=y
+CONFIG_MALLOC_TLSF=y
 CONFIG_PROMPT="9263-EK:"
 CONFIG_LONGHELP=y
 CONFIG_GLOB=y
@@ -20,11 +24,15 @@ CONFIG_CMD_LOADB=y
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MTEST=y
 CONFIG_CMD_FLASH=y
-CONFIG_CMD_BOOTM_ZLIB=y
-CONFIG_CMD_BOOTM_BZLIB=y
 CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
+CONFIG_CMD_UIMAGE=y
+# CONFIG_CMD_BOOTU is not set
 CONFIG_CMD_RESET=y
 CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
 CONFIG_CMD_GPIO=y
@@ -38,8 +46,13 @@ CONFIG_NET_TFTP=y
 CONFIG_DRIVER_NET_MACB=y
 # CONFIG_SPI is not set
 CONFIG_DRIVER_CFI=y
+# CONFIG_DRIVER_CFI_INTEL is not set
 CONFIG_MTD=y
+# CONFIG_MTD_OOB_DEVICE is not set
 CONFIG_NAND=y
+# CONFIG_NAND_ECC_HW is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+# CONFIG_NAND_ECC_HW_NONE is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_UBI=y
 CONFIG_USB_GADGET=y
-- 
1.7.7