[PATCH 9/9] Add compressed image support

[Jean-Christophe PLAGNIOL-VILLARD]

> +{
> +	u32 r;
> +
> +	/* Setup the stack */
> +	r = STACK_BASE + STACK_SIZE - 16;
> +	__asm__ __volatile__("mov sp, %0" : : "r"(r));
> +	/* clear bss */
> +	memset(__bss_start, 0, __bss_stop - __bss_start);
> +
> +	start_barebox();
> +}
> +#else
>  void __naked __section(.text_entry) start(void)
>  {
>  	barebox_arm_head();
>  }
> +#endif
>  
>  void __naked __section(.text_exceptions) exception_vectors(void)
>  {
>  	__asm__ __volatile__ (
>  		".arm\n"
> -		"b reset\n"				/* reset */
> +		"1: b 1b\n"					/* reset */
>  #ifdef CONFIG_ARM_EXCEPTIONS
>  		"ldr pc, =undefined_instruction\n"	/* undefined instruction */
>  		"ldr pc, =software_interrupt\n"		/* software interrupt (SWI) */
> @@ -98,6 +118,34 @@ void __naked __bare_init reset(void)
>  	board_init_lowlevel_return();
>  }
>  
> +extern void *input_data;
> +extern void *input_data_end;
> +
> +#define STATIC static
> +#include "../../../lib/decompress_unlzo.c"
> +
> +void barebox_uncompress(void *compressed_start, unsigned int len)
> +{
> +	void (*barebox)(void);
need to check here if we are at TEXT_BASE (I mean if the code run where we are
supposed to uncompress

otherwise on at91 it will not work as the bootstrap put use at TEXT_BASE

so we have need to link at an other address

but the decompressor need work anyway by copying itself with the data before
of after the TEXT_BASE
and we should take the uncompress size about 4 times the compressed one.
There is nearly no change to compress more than 75%


otherwise Tested by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>

Best Regards,
J.