"panda" config and build doesn't work on panda ES at all

[Robert P. J. Day]

  just for fun, i configured and built MLO and barebox.bin for the
panda, then tried to use that on a panda ES -- got no response
whatever from minicom.  i did verify that i could boot to barebox just
fine on a regular panda, though.

  this is different from the case of a regular beagle and beagle xM,
for which the MLO and barebox.bin boot just fine on an xM, so there's
clearly a significant difference between those two panda variants as
far as barebox is concerned.  i haven't had any time to look at it in
more detail yet.

rday


-- 

========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================