[PATCH] i.MX (and one generic) clock patches

[Sascha Hauer]

The following has some fixes to the i.MX6 clock support I recently
included in the kernel, mostly needed for adding SATA support.

Interesting for non-i.MX users is the patch adding a table based
divider to the common clk stuff.

Sascha

----------------------------------------------------------------
Sascha Hauer (6):
      ARM i.MX6: fix ethernet PLL rate
      ARM i.MX6: rename PLLs according to datasheet
      clk: Add clk table based divider support
      ARM i.MX6 pllv3: Do not use delay functions
      ARM i.MX6 clk: remove gate_mask from pllv3
      ARM i.MX6: Add sata device

 arch/arm/mach-imx/clk-imx6.c                  |   40 ++++++---
 arch/arm/mach-imx/clk-pllv3.c                 |   83 +++--------------
 arch/arm/mach-imx/clk.h                       |    2 +-
 arch/arm/mach-imx/include/mach/devices-imx6.h |    5 ++
 arch/arm/mach-imx/include/mach/imx6-regs.h    |    2 +
 drivers/clk/Makefile                          |    2 +-
 drivers/clk/clk-divider-table.c               |  119 +++++++++++++++++++++++++
 include/linux/clk.h                           |   10 +++
 8 files changed, 180 insertions(+), 83 deletions(-)
 create mode 100644 drivers/clk/clk-divider-table.c