[PATCH 7/7] smm911x: check if the device is ready before using it

[Jean-Christophe PLAGNIOL-VILLARD]

On 08:53 Wed 29 Aug     , Sascha Hauer wrote:
> On Wed, Aug 29, 2012 at 07:06:18AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > poll the READY bit in PMT_CTRL. Any other access to the device is
> > forbidden while this bit isn't set. Try for 100ms
> > 
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> > ---
> >  drivers/net/smc911x.c |   12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> > 
> > diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
> > index cfcd83f..3695d32 100644
> > --- a/drivers/net/smc911x.c
> > +++ b/drivers/net/smc911x.c
> > @@ -422,6 +422,7 @@ static int smc911x_probe(struct device_d *dev)
> >  	uint32_t val;
> >  	int is_32bit;
> >  	struct smc911x_plat *pdata = dev->platform_data;
> > +	unsigned int to = 100;
> >  
> >  	priv = xzalloc(sizeof(*priv));
> >  	is_32bit = dev->resource[0].flags & IORESOURCE_MEM_TYPE_MASK;
> > @@ -452,6 +453,17 @@ static int smc911x_probe(struct device_d *dev)
> >  		}
> >  	}
> >  
> > +	/*
> > +	 * poll the READY bit in PMT_CTRL. Any other access to the device is
> > +	 * forbidden while this bit isn't set. Try for 100ms
> > +	 */
> > +	while (!(smc911x_reg_read(priv, PMT_CTRL) & PMT_CTRL_READY) && --to)
> > +		udelay(1000);
> 
> please use a regular timeout loop
code from the kernel I prefer to keep it as it

Best Regards,
J.