[PATCH V2 2/2] Add board support for Karo TX51 i.mx51 SODIMM module.

[Sascha Hauer]

Hi Christian,

On Thu, Mar 22, 2012 at 12:23:13PM +0100, Christian Kapeller wrote:
> Supported devices:
>  - nand
>  - ethernet
>  - mmc0, mmc1 (on stk5v3 development board)
>  - led (on stk5v3 development board)
> ---
>  arch/arm/Makefile                        |    1 +
>  arch/arm/boards/karo-tx51/Makefile       |    2 +
>  arch/arm/boards/karo-tx51/config.h       |   21 +++
>  arch/arm/boards/karo-tx51/env/config     |   43 +++++
>  arch/arm/boards/karo-tx51/flash_header.c |   58 ++++++
>  arch/arm/boards/karo-tx51/tx51.c         |  290 ++++++++++++++++++++++++++++++
>  arch/arm/boards/karo-tx51/tx51.dox       |   50 +++++
>  arch/arm/configs/tx51stk5_defconfig      |  148 +++++++++++++++
>  arch/arm/mach-imx/Kconfig                |    8 +
>  9 files changed, 621 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/boards/karo-tx51/Makefile
>  create mode 100644 arch/arm/boards/karo-tx51/config.h
>  create mode 100644 arch/arm/boards/karo-tx51/env/config
>  create mode 100644 arch/arm/boards/karo-tx51/flash_header.c
>  create mode 100644 arch/arm/boards/karo-tx51/tx51.c
>  create mode 100644 arch/arm/boards/karo-tx51/tx51.dox
>  create mode 100644 arch/arm/configs/tx51stk5_defconfig

Better late than never, I just applied this patch with some slight
adjustments to make it compile on the newer codebase. Unfortunately
I cannot find out tx51 board, so I couldn't test it. I hope it works.
The iomux patch became unnecessary in the mean time, so I skipped that.

Thanks
 Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |