[PATCH V2 0/3] MPC85xx support

Sascha Hauer s.hauer at pengutronix.de
Sun Apr 15 10:59:53 EDT 2012


Hi Renaud,

On Fri, Apr 13, 2012 at 02:04:29PM +0100, Renaud Barbier wrote:
> This patchset introduces the MPC85xx architecture to Barebox. The
> existing PPC code is modified to enable multiple PowerPC architecture
> support. All existing architecture specific MPC5xxx code which prevents
> adding additional architectures is moved into the architecture specific
> subdirectories and the PCM030 configuration fixed to use this new
> configuration.
> 
> Base MPC85xx infrastructure is added to enable the required
> functionality for a minimal boot target in 32 bit addressing mode
> using an e500v2 core.
> 
> Finally support is added for a minimal Freescale P2020RDB platform with
> driver support currently limited to NOR and serial port only.
> 
> Renaud Barbier (3):
>   Preparation stage to support multiple PPC architectures
>   Minimal support of the MPC85xx architecture
>   Minimal P2020RDB platform support and configuration file
> 

Much better than the last version, thanks.

I realized that you base parts of your code on the unused board_data. I
just sent out a patch to remove the unused code, and you shouldn't use
it on the new mpc85xx support also.

I'll have a close look at your series later, this is only one thing I
realized when looking at it.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the barebox mailing list