[PATCH 12/12] at91: add Calao USB-A9263
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Mon Sep 19 08:15:49 EDT 2011
http://www.calao-systems.com
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
arch/arm/Makefile | 1 +
arch/arm/boards/usb-a926x/init.c | 7 +++
arch/arm/configs/usb_a9263_128mib_defconfig | 59 +++++++++++++++++++++++++++
arch/arm/configs/usb_a9263_defconfig | 58 ++++++++++++++++++++++++++
arch/arm/mach-at91/Kconfig | 9 ++++-
5 files changed, 133 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/configs/usb_a9263_128mib_defconfig
create mode 100644 arch/arm/configs/usb_a9263_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index f226575..d25412d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -106,6 +106,7 @@ board-$(CONFIG_MACH_FREESCALE_MX53_LOCO) := freescale-mx53-loco
board-$(CONFIG_MACH_GUF_CUPID) := guf-cupid
board-$(CONFIG_MACH_MINI2440) := mini2440
board-$(CONFIG_MACH_USB_A9260) := usb-a926x
+board-$(CONFIG_MACH_USB_A9263) := usb-a926x
board-$(CONFIG_MACH_USB_A9G20) := usb-a926x
board-$(CONFIG_MACH_VERSATILEPB) := versatile
board-$(CONFIG_MACH_TX25) := karo-tx25
diff --git a/arch/arm/boards/usb-a926x/init.c b/arch/arm/boards/usb-a926x/init.c
index d09c2da..07d85c1 100644
--- a/arch/arm/boards/usb-a926x/init.c
+++ b/arch/arm/boards/usb-a926x/init.c
@@ -45,6 +45,8 @@ static void usb_a9260_set_board_type(void)
{
if (machine_is_usb_a9g20())
armlinux_set_architecture(MACH_TYPE_USB_A9G20);
+ else if (machine_is_usb_a9263())
+ armlinux_set_architecture(MACH_TYPE_USB_A9263);
else
armlinux_set_architecture(MACH_TYPE_USB_A9260);
}
@@ -101,6 +103,11 @@ static void usb_a9260_add_device_nand(void)
else
sam9_smc_configure(3, &usb_a9260_nand_smc_config);
+ if (machine_is_usb_a9263()) {
+ nand_pdata.rdy_pin = AT91_PIN_PA22;
+ nand_pdata.enable_pin = AT91_PIN_PD15;
+ }
+
at91_add_device_nand(&nand_pdata);
}
diff --git a/arch/arm/configs/usb_a9263_128mib_defconfig b/arch/arm/configs/usb_a9263_128mib_defconfig
new file mode 100644
index 0000000..8d5342e
--- /dev/null
+++ b/arch/arm/configs/usb_a9263_128mib_defconfig
@@ -0,0 +1,59 @@
+CONFIG_ARCH_AT91SAM9263=y
+CONFIG_MACH_USB_A9263=y
+CONFIG_AEABI=y
+CONFIG_AT91_HAVE_SRAM_128M=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_MMU=y
+CONFIG_KALLSYMS=y
+CONFIG_PROMPT="USB-9G20:"
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_PROMPT_HUSH_PS2="y"
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/usb-a926x/env"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_PASSWD=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_SHA256SUM=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_BOOTM_ZLIB=y
+CONFIG_CMD_BOOTM_BZLIB=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_GPIO=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_NFS=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_NET_TFTP_PUSH=y
+CONFIG_NET_NETCONSOLE=y
+CONFIG_NET_RESOLV=y
+CONFIG_DRIVER_NET_MACB=y
+# CONFIG_SPI is not set
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
+CONFIG_UBI=y
diff --git a/arch/arm/configs/usb_a9263_defconfig b/arch/arm/configs/usb_a9263_defconfig
new file mode 100644
index 0000000..9f53431
--- /dev/null
+++ b/arch/arm/configs/usb_a9263_defconfig
@@ -0,0 +1,58 @@
+CONFIG_ARCH_AT91SAM9263=y
+CONFIG_MACH_USB_A9263=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_MMU=y
+CONFIG_KALLSYMS=y
+CONFIG_PROMPT="USB-9G20:"
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_PROMPT_HUSH_PS2="y"
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/usb-a926x/env"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_PASSWD=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_SHA256SUM=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_BOOTM_ZLIB=y
+CONFIG_CMD_BOOTM_BZLIB=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_GPIO=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_NFS=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_NET_TFTP_PUSH=y
+CONFIG_NET_NETCONSOLE=y
+CONFIG_NET_RESOLV=y
+CONFIG_DRIVER_NET_MACB=y
+# CONFIG_SPI is not set
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
+CONFIG_UBI=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index b53b1c4..2ac23b5 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -15,6 +15,7 @@ config BOARDINFO
default "Atmel at91sam9m10g45-ek" if MACH_AT91SAM9M10G45EK
default "Bucyrus MMC-CPU" if MACH_MMCCPU
default "Calao USB-A9260" if MACH_USB_A9260
+ default "Calao USB-A9263" if MACH_USB_A9263
default "Calao USB-A9G20" if MACH_USB_A9G20
default "Ronetix PM9261" if MACH_PM9261
default "Ronetix PM9263" if MACH_PM9263
@@ -203,6 +204,12 @@ config MACH_PM9263
help
Say y here if you are using the Ronetix PM9263 Board
+config MACH_USB_A9263
+ bool "CALAO USB-A9263"
+ help
+ Select this if you are using a Calao Systems USB-A9263.
+ <http://www.calao-systems.com>
+
endchoice
endif
@@ -250,7 +257,7 @@ config AT91_HAVE_2MMC
config AT91_HAVE_SRAM_128M
bool "Have 128 of ram"
- depends on MACH_USB_A9G20
+ depends on MACH_USB_A9G20 || MACH_USB_A9263
help
Select this if you board have 128 MiB of Ram (as USB_A9G20 C11)
--
1.7.5.4
More information about the barebox
mailing list