[PATCH] usb: fix unaligned access

Fabian van der Werf fvanderwerf at gmail.com
Sat Oct 22 09:19:53 EDT 2011


---
 drivers/usb/core/usb.c      |   12 +++++++-----
 drivers/usb/host/ehci-hcd.c |    9 +++++++--
 2 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 7039a2c..369a393 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -50,6 +50,7 @@
 #include <driver.h>
 #include <linux/ctype.h>
 #include <asm/byteorder.h>
+#include <asm/unaligned.h>
 #include <xfuncs.h>
 #include <init.h>
 
@@ -1071,6 +1072,7 @@ static int usb_hub_configure(struct usb_device *dev)
 	struct usb_hub_status *hubsts;
 	int i;
 	struct usb_hub_device *hub;
+	unsigned short hub_chars;
 
 	hub = xzalloc(sizeof (*hub));
 	dev->hub = hub;
@@ -1100,8 +1102,8 @@ static int usb_hub_configure(struct usb_device *dev)
 	}
 	memcpy((unsigned char *)&hub->desc, buffer, descriptor->bLength);
 	/* adjust 16bit values */
-	hub->desc.wHubCharacteristics =
-				le16_to_cpu(descriptor->wHubCharacteristics);
+	hub_chars = le16_to_cpu(get_unaligned(&descriptor->wHubCharacteristics));
+	put_unaligned(hub_chars, &hub->desc.wHubCharacteristics);
 	/* set the bitmap */
 	bitmap = (unsigned char *)&hub->desc.DeviceRemovable[0];
 	/* devices not removable by default */
@@ -1118,7 +1120,7 @@ static int usb_hub_configure(struct usb_device *dev)
 	dev->maxchild = descriptor->bNbrPorts;
 	USB_HUB_PRINTF("%d ports detected\n", dev->maxchild);
 
-	switch (hub->desc.wHubCharacteristics & HUB_CHAR_LPSM) {
+	switch (hub_chars & HUB_CHAR_LPSM) {
 	case 0x00:
 		USB_HUB_PRINTF("ganged power switching\n");
 		break;
@@ -1131,12 +1133,12 @@ static int usb_hub_configure(struct usb_device *dev)
 		break;
 	}
 
-	if (hub->desc.wHubCharacteristics & HUB_CHAR_COMPOUND)
+	if (hub_chars & HUB_CHAR_COMPOUND)
 		USB_HUB_PRINTF("part of a compound device\n");
 	else
 		USB_HUB_PRINTF("standalone hub\n");
 
-	switch (hub->desc.wHubCharacteristics & HUB_CHAR_OCPM) {
+	switch (hub_chars & HUB_CHAR_OCPM) {
 	case 0x00:
 		USB_HUB_PRINTF("global over-current protection\n");
 		break;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 72f1c14..20c518a 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -33,6 +33,7 @@
 #include <errno.h>
 #include <usb/ehci.h>
 #include <asm/mmu.h>
+#include <asm/unaligned.h>
 
 #include "ehci.h"
 
@@ -795,6 +796,7 @@ static int ehci_init(struct usb_host *host)
 	struct ehci_priv *ehci = to_ehci(host);
 	uint32_t reg;
 	uint32_t cmd;
+	unsigned short hub_chars;
 
 	ehci_halt(ehci);
 
@@ -819,12 +821,15 @@ static int ehci_init(struct usb_host *host)
 	reg = ehci_readl(&ehci->hccr->cr_hcsparams);
 	descriptor.hub.bNbrPorts = HCS_N_PORTS(reg);
 
+	hub_chars = get_unaligned(&descriptor.hub.wHubCharacteristics);
 	/* Port Indicators */
 	if (HCS_INDICATOR(reg))
-		descriptor.hub.wHubCharacteristics |= 0x80;
+		hub_chars |= 0x80;
 	/* Port Power Control */
 	if (HCS_PPC(reg))
-		descriptor.hub.wHubCharacteristics |= 0x01;
+		hub_chars |= 0x01;
+
+	put_unaligned(hub_chars, &descriptor.hub.wHubCharacteristics);
 
 	/* Start the host controller. */
 	cmd = ehci_readl(&ehci->hcor->or_usbcmd);
-- 
1.7.0.4




More information about the barebox mailing list