bootm

[Baruch Siach]

Hi Renaud,

On Thu, Oct 06, 2011 at 11:46:35AM +0100, Renaud Barbier wrote:
> It would be for a ppc.
> 
> I am evaluating barebox on a mpc8544.

Can you share your experience with running Barebox on this e500 based chip?  
Have you added anything to the generic arch/ppc/ code?

I'm currently working with an e500 based chip (P1011), so I'm very much 
interested in your experience.

baruch

> On 06/10/11 08:51, Sascha Hauer wrote:
> >On Wed, Oct 05, 2011 at 03:52:45PM +0100, Renaud Barbier wrote:
> >>Hello,
> >>I am looking for information on how to boot Linux with a device tree.
> >>
> >>Basically, I have a  uImage and a device tree(dtb) and with U-boot I
> >>used to do:
> >>bootm uImage_address -- dtb_address
> >>
> >>How does it work with barebox?
> >As Jean-Christophe pointed out the architecture is important. On
> >Arm we do not have devicetree support in any official tree, but
> >I already have patches.
> >
> >Sascha

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -