[PATCH] arm:imx27: add basic support for KaRo TX27 module on StarterKit 5

[Sascha Hauer]

On Fri, Nov 11, 2011 at 07:12:56PM +0100, Mark Vels wrote:
> On 11-11-11 16:31, Sascha Hauer wrote:
> > On Thu, Nov 10, 2011 at 11:34:27PM +0100, Mark Vels wrote:
> >> On 11/03/2011 02:46 PM, Mark Vels wrote:
> >>> This patch adds basic support for the TX27 CPU module.
> >>> It has been tested so far using OpenOCD to write it into memory and execute.
> >>> Environment loading and saving from NAND seems to work correctly, further
> >>> testing will be focused on booting from NAND.
> >>>
> >>> Since I don't have any datasheets of the IIM in the i.MX27 I would appreciate
> >>> some help with getting the serial number and the ethernet MAC from there. Can
> >>> anyone shine some light here?
> > I don't think that the i.MX27 has any MAC address in the IIM if the
> > board manufacturer has programmed one.
> kk, that explains. You think the same goes for the serial number?
> I expected this to be preprogrammed during  silicon production but I may of course be wrong...
> >>> Signed-off-by: Mark Vels<mark.vels at team-embedded.nl>
> >>> ---
> >> Anyone? No comments?
> > The patch looks fine. Any reason not to use the default environment?
> >
> > Sascha
> >
> >
> Yeah, it's probably called ignorance :-( I just copied other stuff
> from the tx25 over.  I'll have a look why the tx25 isn't using the
> generic defaultenv too, if I can't find any reason I'll submit a new
> patch.

Most probably because noone converted it so far.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |