[PATCH] arm:imx27: add basic support for KaRo TX27 module on StarterKit 5

[Sascha Hauer]

On Thu, Nov 10, 2011 at 11:34:27PM +0100, Mark Vels wrote:
> On 11/03/2011 02:46 PM, Mark Vels wrote:
> >This patch adds basic support for the TX27 CPU module.
> >It has been tested so far using OpenOCD to write it into memory and execute.
> >Environment loading and saving from NAND seems to work correctly, further
> >testing will be focused on booting from NAND.
> >
> >Since I don't have any datasheets of the IIM in the i.MX27 I would appreciate
> >some help with getting the serial number and the ethernet MAC from there. Can
> >anyone shine some light here?

I don't think that the i.MX27 has any MAC address in the IIM if the
board manufacturer has programmed one.

> >
> >Signed-off-by: Mark Vels<mark.vels at team-embedded.nl>
> >---
> Anyone? No comments?

The patch looks fine. Any reason not to use the default environment?

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |